門協調裝置檢測

門協調裝置檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

NF P26-320/A1-2003建筑五金.門協調裝置.要求和檢驗方法

Le présent amendement a été préparé dans le but d'ajouter à la norme NF EN 1158, tous les éléments nécessaires pour que les dispositifs de sélection de vantaux isolés ou incorporés à un ferme-porte avec ou sans dispositif de retenue électromagnétique, destinés à être utilisés sur des portes de compartimentation du feu/fumées puissent être reconnus conformes à la Directive \"Produits de la Construction\" (89/106/CEE) et porter le marquage CE.

JS 10024-2007建筑構件.門協調裝置.要求和試驗方法

This standard specifies requirements for the following door coordinator devices for use on double leaf swing doors .

TS EN 1158-2004建筑五金件. 門協調裝置. 要求和試驗方法

This standard specifies requirements for the following door coordinator devices for use on double leaf sxing doors: - separately mounted door coordinator devcives; - Coordinator mechanisms incorporated in door closers; - coordinator mechanisms incorporated in door closers with electrically powered hold-open devices.\" =>Insert the following new paragrafp: \"Door clodsing decives are covered by EN 1154\". => Insert the following new paragraph: \"Electricaly powered hold-open decives are covered by EN 1155\".

TS EN 1158/A1/AC-2007建筑五金件. 門協調裝置. 要求和試驗方法

This standard specifies requirements for the following door coordinator devices for use on double leaf sxing doors: - separately mounted door coordinator devcives;

DIN EN 179-2008建筑附件.逃離線路用搬把式門拉手或逃生用鎖(push pad)的緊急出口裝置.要求和試驗方法

This European Standard specifies requirements for the manufacture, performance and testing ofemergency exit devices mechanically operated by either a lever handle or a push pad for the purposeof achieving a safe exit under an emergency situation on escape routerThe suitability of an emergency exit device for use on smoke/fire-resisting door assemblies isdetermined by fire performance tests conducted in addition to the performance tests required by thisEuropean Standard. Annex B indicates additional requirements for these products.This European Standard covers emergency exit devices, which are either manufactured and placedon the market in their entirety by one producer, or produced by more than one producer andsubsequently placed on the market as a kit in a single transaction.

DIN EN 1125-2008建筑附件.逃離線路用水平桿控制的應急出口裝置.要求和試驗方法

This European Standard specifies requirements for the manufacture, performance and testing of panic exitdevices mechanically operated by either a horizontal push-bar or a horizontal touch-bar, specificallydesigned for use in a panic situation on escape routes.The suitability of a panic exit device for use on fire/smoke resisting door assemblies is determined by fireperformance tests conducted in addition to the performance tests required by this European Standard.Annex B indicates additional requirements for these products.This European Standard covers panic exit devices which are either manufactured and placed on themarket in their entirety by one producer or produced by more than one producer and subsequently placedon the market as a kit in a single transaction.

DIN EN 14846-2008建筑五金件.鎖和插銷.電機操作的鎖和鎖舌片.要求和試驗方法

This European Standard specifies requirements and test methods for strength, security, durability andfunction of electrical and electronic components for all types of electromechanically operated locksand striking plates used on doors, window doors and entrance doors in buildings.Requirements relating to the purely mechanical feature of products included in this EuropeanStandard (e.g. resistance to drilling/side load) are covered by EN 12209.This European Standard covers electromechanically operated locks and striking plates which areeither manufactured and placed on the market in their entirety by one producer or assembled fromsub-assemblies produced by more than one producer and designed to be used in combination.This document is not applicable to electrically powered hold-open devices (EN 1155), electricallycontrolled panic exit systems (prEN 13633) or electrically controlled emergency exit systems(prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders(EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300),furniture locks or prison locks, nor does it apply to cover operating and identification devices (such asmechanical cylinders, intelligent cards, digit codes, magnetic cards).This European Standard does not, for the time being, apply to electromagnetic door locks but thesedevices will be considered for inclusion in the first revision of this European Standard.

DIN EN 16034-2014行人門組, 工業, 商業, 車庫門以及可開啟窗戶. 產品標準和性能特征. 耐火和/或煙霧控制特性; 德文版本EN 16034-2014

This European Standard identifies material independent, safety and performance requirements applicable to all fire resisting and/or smoke control products intended to be used in fire and/or smoke compartmentation and/or escape routes, which are either: - industrial, commercial and/or garage doorsets, rolling shutters or operable fabric curtains intended for the installation in areas in the reach of persons and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons or - rolling shutters or operable fabric curtains used in retail premises which are mainly provided for the access of persons rather than vehicles or goods or - pedestrian doorsets and/or openable windows and/or inspection hatches which are hinged or sliding, intended for the installation in areas in the reach of persons, and for which the main intended uses are giving safe access for persons and which are manually or power operated and: - opening and self closing as a normal mode of operation or - normally held open but self closing in case of fire or smoke or - normally maintained locked in the closed position (e. g. service access/inspection doorsets) and completed: - with building hardware, - with or without any side panel(s), flush over panel(s) and/or transom panel(s) (with or without glazing) and contained within a single perimeter frame for inclusion in a single aperture, - with or without any vision panel(s) in the door leaf or leave(s), - with or without any seals (e. g. for smoke control, fire resistance, draught, acoustic or weather characteristics).

BS EN 1158-1997建筑五金.門協調裝置.要求和試驗方法

This European Standard specifies requirements for the following door coordinator devices for use on double leaf swing doors:\n—separately mounted door coordinator devices;\n—coordinator mechanisms incorporated in door closers;\n—coordinator mechanisms incorporated in door closers with electrically powered hold-open devices.\nDoor coordinator devices are used where it is necessary to ensure the correct sequence of closing of double leaf swing doors, for example doors with rebated meeting stiles.\nDoor coordinator devices manufactured in accordance with this European Standard are recommended for use wherever there is a requirement for reliable sequential closing of double leaf swing fire/smoke doors incorporating rebated meeting stiles.\nDoor coordinator devices for use on fire/smoke doors need additional attributes in order to contribute actively to meeting the essential requirements of safety in case of fire, either independently or as part of a complete door assembly.\nThese additional requirements for door coordinator devices for use on a fire/smoke door assembly are specified in normative Annex A.\nDoor closing devices are covered by EN 1154.\nElectrically powered hold-open devices are covered by EN 1155.

BS EN 14846-2008建筑五金件 鎖和插銷 電動鎖和沖擊板要求和試驗方法

This European Standard specifies requirements and test methods for strength, security, durability andfunction of electrical and electronic components for all types of electromechanically operated locksand striking plates used on doors, window doors and entrance doors in buildings.Requirements relating to the purely mechanical feature of products included in this EuropeanStandard (e.g. resistance to drilling/side load) are covered by EN 12209.This European Standard covers electromechanically operated locks and striking plates which areeither manufactured and placed on the market in their entirety by one producer or assembled fromsub-assemblies produced by more than one producer and designed to be used in combination.This document is not applicable to electrically powered hold-open devices (EN 1155), electricallycontrolled panic exit systems (prEN 13633) or electrically controlled emergency exit systems(prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders(EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300),furniture locks or prison locks, nor does it apply to cover operating and identification devices (such asmechanical cylinders, intelligent cards, digit codes, magnetic cards).This European Standard does not, for the time being, apply to electromagnetic door locks but thesedevices will be considered for inclusion in the first revision of this European Standard.