固體生物燃料檢測

固體生物燃料檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 10184-2015電站鍋爐性能試驗規程

本標準規定了燃用煤、油、氣(主要指天然氣)和生物質燃料的電站鍋爐性能試驗(包括鑒定試驗、驗收試驗和常規試驗)方法。本標準適用范圍如下：a)　適用于蒸汽流量不低于35 t/h，蒸汽壓力不低于3.8 MPa，蒸汽溫度不低于440 ℃的電站鍋爐；b)　適用于為了其他目的(包括燃燒調整、燃料變動、設備改進等)進行的鍋爐性能試驗；c)　燃用其他燃料的電站鍋爐性能試驗可參照本標準執行。本標準不適用于核電站蒸汽發生器的性能試驗以及余熱鍋爐、垃圾焚燒鍋爐的性能試驗。

GB 17411-2015船用燃料油

本標準規定了由石油制取的船用燃料油的分類和代號、要求和試驗方法、檢驗規則、包裝、標志、運輸、貯存及安全。本標準適用于海［洋］船用柴油機及其鍋爐用燃料油。符合本標準的燃料油也適用于同樣或類似制造的固定式柴油機和其他船舶用機械。本標準規定了用于船舶的4種餾分燃料油和6種殘渣燃料油。其中餾分燃料DMX供柴油機應急時使用。

GB/T 30366-2013生物質術語

本標準界定了生物質一般概念、生物質來源、生物質轉化和加工、生物質利用等相關的術語。本標準適用于生物質及其相關領域的標準化文件和技術文件,用于定義通用的術語。

GB/T 31741-2015林業生物質能源名詞術語

本標準規定了林業生物質能資源培育和加工利用領域的名詞術語和定義。本標準適用于林業、生物質能源及有關行業教學、科研、生產、加工、經營及管理等領域。

NY/T 2449-2013農村能源術語

本標準規定了農村能源術語、定義。本標準適用于農村能源建設中的技術推廣、生產經營、科研、管理、教學及其他應用領域。

NB/T 10012-2014生物燃料乙醇行業環境污染控制評價技術方法

本標準適用于以淀粉質、糖質及纖維素質為主要原料的燃料乙醇生產企業(包括現有、改擴建或新建)環境污染控制的評價。本標準為生物燃料乙醇(簡稱“燃料乙醇”)企業環境污染控制評價提供依據。

NB/T 13001-2015生物液體燃料加工轉化領域項目可行性研究報告編制內容規定

本標準規定了生物液體燃料加工轉化領域項目可行性研究報告的編制原則、內容和成果要求。本標準適用于生物液體燃料加工轉化領域核準類項目可行性研究報告的編制，其他生物質能源項目可參照執行。

DL/T 958-2014名詞術語.電力燃料

本標準規定了電力燃料名詞術語的名稱、英文譯名及其定義。本標準適用于電力燃料的技術標準、技術文件、科技書籍、期刊、教材和手冊。

DL/T 1033.10-2016電力行業詞匯 第10部分:電力設備

本部分規定了電力設備的名詞詞匯。本部分適用于電力行業工作人員、高等院校師生在對外交流、定貨、簽訂合同、設備驗收和學術交流時使用。

ISO 14780-2017固體生物燃料. 制樣

This document defines methods for reducing combined samples (or increments) to laboratory samples and laboratory samples to sub-samples and general analysis samples and is applicable to solid biofuels. The methods defined in this document can be used for sample preparation, for example, when the samples are to be tested for calorific value, moisture content, ash content, bulk density, durability, particle size distribution, ash melting behaviour, chemical composition, and impurities

ISO 16967-2015固體生物燃料. 主要元素的測定. 鋁, 鈣, 鐵, 鎂, 磷, 鉀, 硅, 鈉和鈦

This International Standard describes methods for the\ndetermination of major elements of solid biofuels respectively of\ntheir ashes, which are Al, Ca, Fe, Mg, P, K, Si, Na, Ti. The\ndetermination of other elements such as barium (Ba) and manganese\n(Mn) is also possible with the methods described in this\nInternational Standard.\nThis International Standard includes two parts: Part A describes\nthe direct determination on the fuel, this method is also\napplicable for sulfur and minor elements, Part B gives a method of\ndetermination on a prepared 550 °C ash.

ISO 16968-2015固體生物燃料. 次要元素的測定

This International Standard is intended for the determination of\nthe minor elements Arsenic, Cadmium, Cobalt, Chromium, Copper,\nMercury, Manganese, Molybdenum, Nickel, Lead, Antimony, Vanadium,\nand Zinc in all solid biofuels. Further, it describes methods for\nsample decomposition and suggests suitable instrumental methods for\nthe determination of the elements of interest in the digests. The\ndetermination of other elements such as Selenium, Tin, and Thallium\nis also possible with the method described in this International\nStandard.

ISO 16993-2016固體生物燃料. 一個主要成分到另一個的分析結果轉換

This International Standard gives formulae which allow analytical data relating to solid biofuels to be expressed on the different bases in common use. Consideration is given to corrections that can be applied to certain determined values for solid biofuels prior to their calculation to other bases. In Annex A, tools for integrity checks of analytical results are given. In Annex B, conversion factors for calculation into other units are given. Annex C is a guideline for the use of validation parameters as can be found in ISO/TC 238 analytical standards.

ISO 16994-2016固體生物燃料. 硫和氯總含量的測定

This International Standard describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. This International Standard specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The use of automatic equipment is also included in this International Standard, provided that a validation is carried out as specified and that the performance characteristics are similar to those of the method described in this International Standard.

ISO 17225-2-2021固體生物燃料. 燃料規范和等級. 第2部分: 分級木制丸狀燃料

This document determines the fuel quality classes and specifications of graded wood pellets for nonindustrial and industrial use. This document covers only wood pellets produced from the following raw materials (see ISO 17225-1:2021, Table 1): — 1.1 Forest, plantation and other virgin wood; — 1.2 By-products and residues from wood processing industry; — 1.3.1 Chemically untreated used wood. Thermally treated biomass pellets (e.g. torrefied pellets) are not included in the scope of this document.

ISO 17225-3-2021固體生物燃料. 燃料規范和等級. 第3部分: 分級木塊

This document determines the fuel quality classes and specifications of graded wood briquettes. This document covers only wood briquettes produced from the following raw materials (see ISO 17225-1: 2021, Table 1): — 1.1 Forest, plantation and other virgin wood — 1.2 By-products and residues from wood processing industry — 1.3.1 Chemically untreated used wood NOTE Thermally treated biomass briquettes (e.g. torrefied briquettes) are not included in the scope of this document.