自動和半自動洗衣機檢測

自動和半自動洗衣機檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 2900.29-2008電工術語.家用和類似用途電器

本部分規定了家用和類似用途電器的基本術語。本部分適用于家用和類似用途電器相關標準的制修訂以及其他相關技術文件的編制和技術交流活動。

GB/T 6113.202-2018無線電騷擾和抗擾度測量設備和測量方法規范 第2-2部分:無線電騷擾和抗擾度測量方法 騷擾功率測量

GB/T 6113的本部分規定了30 MHz~1 000 MHz頻段范圍內使用吸收鉗測量騷擾功率的方法。

GB/T 14536.9-2008家用和類似用途電自動控制器. 電動水閥的特殊要求(包括機械要求)

GB 14536.1-2008中的該章，用下述內容代替：1.1本部分適用于家用和類似用途設備中或隨這些設備一起使用的電動水閥，這些設備可以是使用電、燃氣、油、固體燃料、太陽能等能源或是它們的組合，應用范圍包括加熱、空氣調節及類似用途。本部分也適用于GB 4706所涉及的各類器具用的電動水閥。1.1.1本部分包含了對水閥的電氣性能和閥的機械性能的要求，這兩者會影響水閥預期操作。1.1.2本部分適用于電動水閥固有的安全性，適用于涉及到設備保護的操作值和操作程序，適用于家用和類似用途設備中或隨這些設備一起使用的電自動控制器的試驗。對于非一般家用設備用電動閥，而這些設備是由諸如商店或輕工工廠或農場的非農場的非人員使用的，也包含在本部分范圍內。本部分不適用于專門用于工業設備的電動水閥。本部分不適用于：標稱連接尺寸在DN 50以上的電動水閥；標稱允許壓力值在1.6Mpa以上的電動水閥；食品分配器；洗滌劑分配器；蒸汽閥。在本部分中，當不會引起誤解時，下列術語有其特定含義：——“閥”一詞指電動水閥（包括起動器和閥體組件）?！捌饎悠鳌币辉~意思是“電動機構或原動機構”?！伴y體”一詞意思是“閥體組件”?！霸O備”一詞包括器具和控制系統。1.1.3本部分適用于起動器和相互匹配的閥體。1.1.4本部分適用于單個的閥、作為系統部件的閥和與多功能控制器機械地組合在一起的無電氣輸出的閥。

GB/T 17499-2017家用洗衣機電腦程序控制器

本標準規定了家用電動洗衣機電腦程序控制器的試驗條件、技術要求和試驗方法、檢驗規則、標志、包裝、運輸和儲存。本標準適用于以微處理器為核心、以電信號為基準，晶閘管或類似用途的器件為執行開關所組成的洗衣機電腦程序控制器(以下簡稱程控器)，包括洗衣機、洗衣干衣機、干衣機用程控器。

GB/T 22684-2008家用和類似用途電動機式程序控制器

本標準規定了家用和類似用途電動機式程序控制器（以下簡稱程控器）分類與命名、基本參數、技術要求、試驗方法和檢驗規則及標志、包裝、運輸和儲存。本標準適用于家用和類似用途電動機式程序控制器。

GB/T 22937-2008商用洗衣機

本標準規定了商用洗衣機的術語和定義、產品分類、技術要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存。本標準適用于由人員操作的，對織物進行水洗或干洗的洗衣機，包括商用洗衣機、商用（離心式）脫水機和以四氯乙烯為洗滌劑的商用洗衣機。

GB/T 36931-2018工業洗滌機械術語

本標準界定了工業洗滌機械的術語和定義。本標準適用于工業/商用類的洗滌機械。本標準不適用于制衣行業的專用整理機，也不適用于家用和類似用途的電器。

GB 50215-2015煤炭工業礦井設計規范

本規范適用于設計生產能力0.09Mt/a及以上的新建、改建及擴建的煤炭工業礦井的初步可行性研究、可行性研究和設計。

QB/T 1291-1991自動洗衣機用進水電磁閥

本標準規定了進水電磁間的產品分類、技術要求、試驗方法飛檢驗規則、標志、包裝、貯存和運輸。\t本標準適用于額定電壓為250V以下的全自動洗衣機和半自動洗衣機用電磁閥(以下簡稱“進水閣”)。

QB/T 1292-1991自動洗衣機用水位壓力開關

本標準規定了水位壓力開關的產品分類、技術要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存\t本標準適用于全自動洗衣機和半自動洗衣機用水位壓力開關(以下簡稱“開關”)，供控制水位高度用。

QB/T 2823-2006家用和類似用途電動雙驅動洗衣機

本標準規定了家用和類似用途電動雙驅動洗衣機（以下簡稱“雙驅動洗衣機）的術語和定義、分類、要求和試驗方法。本標準適用于家用和類似用途電動雙驅動洗衣機。

QB/T 4137-2010家用和類似用途電動洗衣機用電子程序控制器技術要求

本標準規定了家用和類似用途電動洗衣機用電子程序控制器的術語和定義、產品分類、技術要求和試驗方法。 本標準適用于單相額定電壓不超過250V，在家用和類似用途電動洗衣機上使用的電子程序控制器。

EN 15020-2006軌道交通.救援車掛鉤.性能要求,專用連接體幾何尺寸和試驗方法

This European Standard specifies the requirements forThe rescue coupler for train sets compliant withThe Technical Specification for Interoperability High Speed Rolling Stock. It definesThe interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading. Provisions going beyondThe scope of this European Standard need to be agreed upon byThe contracting parties involved.

DIN EN 415-1-2014打包機的安全.第1部分:打包機及相關設備的專用術語和分類,德文版本EN 415-1-2014

This European standard defines the field of packaging machines in detail, but briefly these are: Filling and Dosing machines; closing machines; labelling, decorating and coding machines; cleaning, sterilising, cooling and drying machines; fill and seal machines; inspection machines; container and component handling machines; form, fill and seal machines; cartoning machines; wrapping machines; group or transit packaging machines; pallet or loading unit forming, dismantling and securing machines.

DIN EN 1010-1-2011機械安全性.印刷和紙加工機械的設計和建造的安全性要求.第1部分:通用要求.德文版本EN 1010-1-2004+A1-2010

This document applies to: - printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and checking the print quality (auxiliary printing machinery).- paper converting machines, i.e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.

DIN EN 1010-2-2011機械安全性.打印機和紙加工機的設計和構造的安全性要求.第2部分:包括預壓機械的印刷機和涂漆機;德文版本EN 1010-2-2006+A1-2010

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti??ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

DIN ISO 7000-2008設備用圖形符號.索引和一覽表

This International Standard provides a synopsis of those graphical symbols which are placed on equipment orparts of equipment of any kind in order to instruct the person(s) using the equipment as to its operation.

BS EN 500-1-2006+A1-2009移動式筑路機械.安全性.一般要求

1.1 This part of EN 500 specifies the common safety requirements for mobile road construction machinery. The EN 500 series is applicable to mobile road construction machinery as listed in Annex A. When no specific standard exists, EN 500-1 applies.It specifies common requirements for the design and construction of mobile road construction machinery in order to protect workers from accidents and health hazards which could occur during operation, loading, transport and maintenance.Additional specific requirements for certain types of mobile road construction machinery are given in parts 2 to 4 and 6 of this standard.This part of this standard gives safety requirements for all types of mobile road construction machinery and shall be used in conjunction with one of the parts 2 to 4 and 6. These machine-specific parts do not repeat the requirements from part 1 but add to or replace the requirements for the type of mobile road construction machinery in question.Machine-specific requirements in parts 2 to 4 and 6 take precedence over the respective requirements of this standard.For types of mobile road construction machinery not dealt with in parts 2 to 4 and 6, EN 500-1 applies and if for those machinery additional derived risks may arise, these risks have to be taken into consideration.1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to mobile road construction machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as specified in Clause 4.1.3 This European Standard applies to machines which are manufactured after the date of publication of this European Standard by CEN.