焊接未退火奧氏體不銹鋼管型制品檢測

焊接未退火奧氏體不銹鋼管型制品檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 21412.5-2017石油天然氣工業 水下生產系統的設計和操作 第5部分:水下臍帶纜

GB/T 21412的本部分規定了臍帶纜及相關附屬設備的設計、材料選擇、制造、設計驗證、試驗、安裝和操作要求，并給出了推薦作法，用于石油天然氣工業。附屬設備不包括上部組塊硬件裝置，這些硬件是指那些在上部組塊懸掛終端之上，不與臍帶纜永久連接的設備。本部分適用于單獨的部件，如電纜、光纖、熱塑性軟管或金屬管構成的臍帶纜，或它們組合成的臍帶纜。本部分適用于靜態或動態運行的臍帶纜，其路徑可為水上-水上，水上-水下和水下-水下。本部分不適用于相關部件接頭，除非這些接頭影響到臍帶纜或其附屬設備的性能。本部分僅適用于以下尺寸的金屬管：壁厚t＜6 mm，內徑ID＜50.8 mm(2 in)。大于這些尺寸的產品應視為管/管道并且按照公認的管線/管道標準進行設計和制造。本部分不適用于額定壓力小于7 MPa(1 015 psi)的金屬管或軟管。本部分不適用于額定電壓高于標準額定電壓U<下標0>/U(U<下標m>)＝3.6/6(7.2)kV rms的電纜，其中U<下標0>、U與U<下標m>由IEC 60502-1與IEC 60502-2定義。

GB 50235-2010工業金屬管道工程施工規范

本規范適用于設計壓力不大于42MPa，設計溫度不超過材料允許使用溫度的工業金屬管道工程的施工。本規范不適用于下列工業金屬管道的施工：1 石油、天然氣、地?zé)岬瓤碧胶筒删蜓b置的管道；2 長輸管道；3 核能裝置的專用管道；4 海上設施和礦井的管道；5 采暖通風與空氣調節的管道及非圓形截面的管道。

GB/T 51012-2014鈾濃縮工廠工藝氣體管道工程施工及驗收規范

本規范適用于設計壓力1Pa~0. 8MPa(G)、設計溫度-80℃~100℃的鈾濃縮工藝氣體管道。

GB 51205-2016精對苯二甲酸工廠設計規范

本規范適用于精對苯二甲酸工廠生產裝置和輔助生產設施的新建、擴建和改建工程的設計，不包括為精對苯二甲酸工廠服務的公用工程設施和辦公設施。

SY/T 0608-2014大型焊接低壓儲罐的設計與建造

本標準適用于具有單一垂直回轉軸，用于儲存石油中間產品(氣體或蒸氣)、成品以及其他類似液體的大型鋼制焊接低壓地上儲罐的設計與建造。本標準適用于設計壓力(表壓)小于0.1MPa (15lb/in<上標2>)，金屬溫度不高于120℃ (250℉)的儲罐。本標準的基本規定適用于低日平均環境溫度為-45℃ (-50℉)以上的建罐地區。附錄S中的低壓不銹鋼儲罐不受環境溫度的限制。附錄R適用于溫度范圍在-51℃～4. 5℃ (-60℉～+ 40℉)的冷藏產品的低壓儲罐。附錄Q適用于溫度不低于-198℃(-325℉)的液化烴氣的低壓儲罐。本標準的規定可適用于：a)盛裝或儲存液面以上存在氣相空間的液體儲罐。b)單獨盛裝或儲存氣體或蒸氣的儲罐，但不適用于懸掛式的氣體儲罐。與按本標準建造儲罐的罐體相連接的內部和外部接管，超出以下范圍的不在本標準規定范圍內：a)螺栓連接法蘭的第一個法蘭密封面。b)罐體外側螺紋連接的第一個螺紋接頭。c)焊接連接的第一道環向接頭。

UL 399-2008飲用水冷卻器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

EN 10297-1-2003機械和一般工程用途的無縫圓形鋼管.交貨技術條件.第1部分:非合金鋼管和合金鋼管

This part of EN 10297 specifies the technical delivery conditions for seamless circular tubes made of non-alloy andalloy steels for mechanical and general engineering purposes

EN ISO 13628-5-2009石油和天然氣工業.水下采油系統的設計和操作.第5部分:海底纜線

This International Standard specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes.

DIN EN 10253-3-2009對焊管配件.第3部分:無特殊檢驗要求的鍛制奧氏體和奧氏體-鐵素體(二相)不銹鋼

1.1 This part of EN 10253 specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austeniticand austenitic-ferritic (duplex) stainless steel without specific inspection requirements.It specifies:-- steel grades;-- mechanical properties;-- dimensions and tolerances;-- requirements for inspection and testing;-- inspection documents;-- marking;-- handling and packaging.1.2 Limitation of useThe allowed pressures and temperatures are the responsibility of the customer according to the state of theart and in application of the safety coefficients in the application regulations, codes and standards.In common, joint coefficient is used in the calculation of the thicknesses of components which include one orseveral butt welds, other than circumferential:-- for equipment subject to random non-destructive testing: 0,85;-- for equipment not subject to non-destructive testing other than visual inspection: 0,7.1.3 Unless otherwise specified in this part of EN 10253 the general technical delivery requirements inEN 100021 apply.

DIN EN 10253-4-2008對焊管配件.第4部分:具有特殊檢驗要求的鍛制奧氏體和鐵素體－奧氏體(二相)不銹鋼

1.1 This European Standard specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at Iow temperature or at elevated temperatures. It specifies: -- the type of fittings; -- type A (see 7.2) -- type B (see 7.3) -- the steel grades; -- the mechanical properties; -- the dimensions and tolerances; -- the requirements for inspection and testing; -- the inspection documents; -- the marking; -- the handling and packaging. NOTE In the case of a harmonised supporting standard for materials, presumption of conformity to the Essential Requirement(s) (ESRs) is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive (PED) are satisfied. 1.2 Unless otherwise specified in this European Standard the general technical delivery requirements in EN 10021 apply.

DIN EN ISO 13628-5-2010石油和天然氣工業.水下采油系統的設計和操作.第5部分:海底纜線

This part of ISO 13628 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries. Ancillary equipment does not include topside hardware. Topside hardware refers to any hardware that is not permanently attached to the umbilical, above the topside hang-off termination.This part of ISO 13628 applies to umbilicals containing components, such as electrical cables, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination.This part of ISO 13628 applies to umbilicals for static or dynamic service, with surface-surface, surface-subsea and subsea-subsea routings.This part of ISO 13628 does not apply to the associated component connectors, unless they affect the performance of the umbilical or that of its ancillary equipment.This part of ISO 13628 applies only to tubes with the following dimensions: wall thickness, t < 6 mm, internal diameter, ID < 50,8 mm (2 in). Tubular products greater than these dimensions can be regarded as pipe/linepipe and it is expected that they be designed and manufactured according to a recognised pipeline/linepipe standard.

DIN EN ISO 13628-15-2012石油和天然氣工業.海底生產系統的設計與操作.第15部分:海底結構和歧管(ISO 13628-15-2011).英文版 EN ISO 13628-15-2011

This part of ISO 13628 addresses specific requirements and recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate any requirement imposed by any other industry specification. This part of ISO 13628 covers subsea manifolds and templates utilized for pressure control in both subsea production of oil and gas, and subsea injection services.

DIN EN ISO 13631-2003石油和天然氣工業.封裝往復式空氣壓縮機

The document gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of package skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries for the compression of hydrocarbon gas.#,,#

DIN EN ISO 13706-2012石油、石化和天然氣工業.風冷熱交換器

This International Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This International Standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.

BS 6180-2011建筑物內及附近用防護柵欄.實施規程

This British Standard gives recommendations and guidance for the design and construction of temporary and permanent barriers to be provided in and about buildings and places of assembly, such barriers being positioned and designed to protect persons from various hazards and to restrict or control the movement of persons or vehicles.This British Standard applies to:a) barriers that indicate routes;b) barriers capable of stopping or diverting moving vehicles within areas where vehicle speed is restricted to a maximum of?16?km/h (4.44?m/s,?10?mile/h);c) walls, glazing and other elements of buildings or structures where such elements act as protective barriers;d) areas other than spectator areas of sports halls and buildings used for spectator sports.This British Standard does not apply to:1) barriers for resisting impact from vehicles travelling at speeds greater than?16?km/h, e.g. bridge parapets beyond the curtilage of a building, or highway safety barriers (see?BS?6779);2) barriers used in building operations and works of engineering construction;3) safety barriers, with or without opening gate features, for the protection of children up to?24?months, where the safety requirement is covered by a specific safety standard, e.g.?BS EN 1930;4) permanent means of access to machinery (see BS EN ISO 14122, all?parts);5) barriers used in spectator areas of sports halls, and buildings used for spectator sports (see BS EN 13200, all parts).

BS 7993-2011316不銹鋼系統用雙套管連接器和組合管道.規范和試驗方法

This British Standard specifies the characteristics of, and performancerequirements for, the tube connector (compression) end(s) of twin ferruleconnectors made of 316 stainless steel. It also specifies requirementsfor 316 stainless steel tubes.The twin ferrule connectors in this standard are suitable for use with annealedstainless steel tubes with outside diameters from 2 mm to 38 mm and1/16 in to 2 in.This British Standard is applicable to twin ferrule connectors that are intendedfor the connection of plain end tubes to other tubes and to ports in accordancewith BS EN ISO 6149-1, BS EN ISO 1179 and BS EN ISO 9974-1, and other portsagreed between the purchaser and manufacturer. It provides external envelope,tube-end-to-tube-end and tube-end-to-port dimensions that facilitate designingsystems that use twin ferrule connectors.NOTE These twin ferrule connectors can also be used with other austenitic stainlesssteel tubes, typically 304, 316L, 321, etc.

BS EN 10253-3-2008對焊管接頭.無特殊檢驗要求的鍛制奧氏體和奧氏體-鐵素體(二相)不銹鋼

1.1 This part of EN 10253 specifies the technical delivery requirements for seamless and welded buttweldingfittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austeniticand austenitic–ferritic (duplex) stainless steel without specific inspection requirements.It specifies:? steel grades;? mechanical properties;? dimensions and tolerances;? requirements for inspection and testing;? inspection documents;? marking;? handling and packaging.1.2 Limitation of useThe allowed pressures and temperatures are the responsibility of the customer according to the state of theart and in application of the safety coefficients in the application regulations, codes and standards.In common, joint coefficient is used in the calculation of the thicknesses of components which include one orseveral butt welds, other than circumferential:? for equipment subject to random non-destructive testing: 0,85;? for equipment not subject to non-destructive testing other than visual inspection: 0,7.1.3 Unless otherwise specified in this part of EN 10253 the general technical delivery requirements inEN 100021 apply.

BS EN 10253-4-2008對焊管道接頭.具有特殊檢驗要求的鍛制奧氏體和鐵素體－奧氏體(二相)不銹鋼

1.1 This European Standard specifies the technical delivery requirements for seamless and welded butt-weldingfittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic andaustenitic-ferritic (duplex) stainless steel which are intended for pressure and corrosion resisting purposes at roomtemperature, at low temperature or at elevated temperatures.It specifies:? the type of fittings;? type A (see 7.2)? type B (see 7.3)? the steel grades;? the mechanical properties;? the dimensions and tolerances;? the requirements for inspection and testing;? the inspection documents;? the marking;? the handling and packaging.NOTE In the case of a harmonised supporting standard for materials, presumption of conformity to the EssentialRequirement(s) (ESRs) is limited to technical data of materials in the standard and does not presume adequacy of the materialto a specific item of equipment. Consequently the technical data stated in the material standard should be assessed against thedesign requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive (PED) aresatisfied.1.2 Unless otherwise specified in this European Standard the general technical delivery requirements inEN 10021 apply.