便攜式二次鋰電池和電池組檢測

便攜式二次鋰電池和電池組檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 23751.1-2009微型燃料電池發電系統.第1部分:安全

本部分適用于便攜式的、輸出直流電壓不超過60V、輸出功率不超過240W的微型燃料電池發電系統、微型燃料電池動力單元和燃料容器。便攜式燃料電池發電系統若輸出電壓超出該限制，則參考IEC 62282-5-1。本部分中的產品不適用于GB 2900.35-2008第3章所定義的危險場所。

GB/T 30084-2013便攜式燃料電池發電系統-安全

本標準規定了便攜式燃料電池發電系統的構造、標志和試驗要求。此類燃料電池系統是可移動、不固定的。便攜式燃料電池發電系統的作用是產生電能。本標準適用于在室內或戶外使用、額定輸出電壓不超過600 V(交流)或850 V(直流)的交流型和直流型便攜式燃料電池發電系統。此類便攜式燃料電池發電系統不應使用于IEV 426-03-01規定的危險位置,除非根據IEC 60079-0:2007對系統加裝了額外的保護措施。本標準不適用于以下情況的便攜式燃料電池發電系統:a) 固定連接(硬接線)于配電系統;b) 固定連接于公共燃料分配系統;c) 對電網供電;d) 為道路車輛提供動力;e) 在民航客機上使用。為混合動力車輛(由蓄電池提供車輛動力和能量)的蓄電池充電的燃料電池不屬于本標準范圍。以下燃料和燃料原料屬于本標準的范圍:--天然氣;--液化石油氣,例如丙烷和丁烷;--液態醇,例如甲醇和乙醇;--汽油;--柴油;--煤油;--氫氣;--在空氣或氧氣環境中,浸漬在電解液(例如鹽的水溶液或堿的水溶液)中的金屬(例如Mg、Al或Zn)或者合金;--氫化物。本標準不排除類似燃料或非空氣來源氧化劑的使用,前提是通過附加要求列明其特定的危險。

SJ/T 11685-2017平衡車用鋰離子電池和電池組規范

本標準規定了平衡車用鋰離子電池和電池組的術語和定義、要求、試驗方法、質量評定及標識、包裝、運輸和儲存。本標準適用于平衡車用鋰離子電池和電池組。對于無自平衡功能的滑板車等類似產品的鋰離子電池、電池組也參考適用。

SN/T 4444-2016進出口燃料電池的檢驗技術要求 便攜式燃料電池發電系統的安全

本標準規定了進出口便攜式燃料電池發電系統的構造、標志和試驗要求。便攜式燃料電池發電系統是可移動的、不固定的而非安裝到一個特定位置上的。便攜式燃料電池發電系統的作用是產生電能。本標準適用于在室內、室外使用額定輸出電壓不超過交流600 V或直流850 V的交流型和直流型便攜式燃料電池發電系統。此類便攜式燃料電池發電系統不得在IEV 426-03-01規定的危險區域內使用，除非根據IEC 60079-0對系統加裝了額外的保護措施。本標準不適用于以下情況的便攜式燃料電池發電系統：a）固定連接（硬連接）于配電系統；b）固定連接于公共燃料分配系統；c）對電網供電；d）為道路交通工具提供動力；e）在民航客機上使用。為混合動力車輛提供動力和能量的蓄電池充電的燃料電池，不包括在本標準的范圍內。以下燃料和燃料原料屬于本標準的范圍：——天然氣；——液化石油氣體，如丙烷和丁烷；——液態醇類，例如甲醇和乙醇；——汽油；——柴油；——煤油；——?dú)錃?；——在空氣或氧氣環境中，浸漬在電解液（如鹽或堿的水溶液）中的金屬（如Mg、Al或Zn）或金屬合金；——?dú)浠?。如果通過附加要求列明了特定的危險，本標準不排除類似燃料或非空氣來源氧化劑的使用。本標準所設定的便攜式燃料電池發電系統的總體設計，應由以下部分系統或全部系統組合而成（見圖1），為執行設計的功能，根據需要集成如下部件：燃料處理系統——用于將輸入的燃料轉化為適用于燃料電池堆成分的化學處理設備，包括任何相關的熱交換器和控制裝置。氧化劑處理系統——可對輸入的氧化劑進行計量、調控、處理并可進行加壓，以便供燃料電池發電系統使用的子系統。熱管理系統——用來冷卻和排熱以保持燃料電池發電系統內部熱平衡的子系統，且必要時，可對過剩熱回收和利用，并可在啟動階段對燃料電池發電系統輔助加熱。功率調節系統——用來改變電壓的幅值或波形，或以其他方法改變或調節電源輸出的裝置。自動控制系統——由傳感器、制動器、閥門、開關和邏輯元件（包括過程控制器）組成的系統，用以使燃料電池發電系統在無人工進行干預時，參數能保持在制造商給定的限值范圍內。燃料電池模塊——集成到發電系統內部、由一個或多個燃料電池堆組成的設備，通過電化學反應將化學能轉化成為電能和熱能。燃料供應系統——內置于便攜式燃料電池系統中，或通過可拆卸、重復灌裝的容器提供。內置儲能系統——內置能源，用以輔助或補充燃料電池模塊對內部或外部負載供電。通風系統——燃料電池發電系統的子系統，通過機械方式供應空氣。水處理系統——用以處理和凈化便攜式燃料電池發電系統內部使用的回收水或補充水。這些要求的目的并不是要阻止本標準未作特別闡述的便攜式燃料電池發電系統的開發，前提是這些替代的設計和結構經過研究，并且通過等效的測試表明與本標準規定的安全性等效?？紤]替代的設計和結構時，本標準可用于對替代材料或方法進行評估，以確保其提供的性能與本標準規定的系統等效。本標準不包括裝置上游不與便攜式燃料電池發電系統連接的加壓式或非加壓式燃料供應容器以及氣體或液體燃料供給連接器的要求。除非另有規定，本標準所述壓力值均被認為是表壓。

IEC 61960-4-2020含堿性或其他非酸性電解質的二次電池和蓄電池. 便攜式二次鋰電池和蓄電池組. 第4部分: 硬幣二次鋰蓄電池和由其制成的蓄電池

This part of IEC 61960 specifies performance tests, designations, markings, dimensions and other requirements for coin secondary lithium cells and batteries for portable applications and backup power supply such as memory backup applications. The objective of this document is to provide the purchasers and users of coin secondary lithium cells and batteries with a set of criteria with which they can assess the performance of coin secondary lithium cells and batteries offered by various manufacturers. This document defines a minimum required level of performance and a standardized methodology by which testing is performed and the results of this testing reported to the user. Hence, users will be able to establish the viability of commercially available cells and batteries via the declared specification and thus be able to select the cell or battery best suited for their intended application. This document covers coin secondary lithium cells and batteries with a range of chemistries. Each electrochemical couple has a characteristic voltage range over which, during discharge, it releases its electrical capacity, a characteristic nominal voltage and a characteristic end-of- discharge voltage. Users of coin secondary lithium cells and batteries are requested to consult the manufacturer for advice. This document also provides guidelines for designers of equipment using lithium batteries (see Annex A).

UL 399-2008飲用水冷卻器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

UL 2054-2004安全家用和商用電池的UL標準.第2版

1.1 These requirements cover portable primary (nonrechargeable) and secondary (rechargeable)batteries for use as power sources in products. These batteries consist of either a single electrochemicalcell or two or more cells connected in series, parallel, or both, that convert chemical energy into electricalenergy by chemical reaction.1.2 These requirements are intended to reduce the risk of fire or explosion when batteries are used in aproduct. The proper use of these batteries in a particular application is dependent on their use in acomplete product that complies with the requirements applicable to such a product.1.3 These requirements are intended to cover batteries for general use and do not include thecombination of the battery and the host product which are covered by requirements in the host productstandard.1.4 These requirements are also intended to reduce the risk of injury to persons due to fire or explosionwhen batteries are removed from a product to be transported, stored, or discarded.1.5 These requirements do not cover the toxicity risk that results from the ingestion of a battery or itscontents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to itscontents.