鉆井液用乳化劑檢測

鉆井液用乳化劑檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 21412.1-2010石油天然氣工業 水下生產系統的設計與操作 第1部分：一般要求和推薦做法

本部分制定了整套水下生產系統從設計到廢棄各個階段的一般要求和推薦做法，作為一個綱領性文件用于指導和制定涉及到水下生產系統各個組成部分更為詳細要求的子系統標準。同時，對于子系統標準內未包括的某些部分，如系統設計、結構、管匯、吊裝設備、顏色和標記等，也給出了較為詳細的要求。對那些應用范圍有限的特種設備，如密閉在干式艙中的組合式采油樹、采油樹和管匯等，這里未做專門討論，但本部分中的相關條款同樣適用于這類設備。

GB/T 28911-2012石油天然氣鉆井工程術語

本標準規定了石油天然氣鉆井工程專用的術語。本標準適用于石油天然氣鉆井工程領域，也適用于石油天然氣工業的其他領域。

GB/T 29170-2012石油天然氣工業 鉆井液 實驗室測試

本標準規定了鉆井液材料和鉆井液的物理、化學、流變等性能的實驗室測試方法。本標準適用于水基鉆井液、油基鉆井液以及其他基液或人工配制流體。本標準不適用于作為控制鉆井液性能的詳細手冊。由于攪拌條件和測試溫度對鉆井液性能影響顯著,本標準給出了推薦的攪拌條件和測試溫度。

GB/T 34903.1-2017石油、石化與天然氣工業 與油氣開采相關介質接觸的非金屬材料 第1部分:熱塑性塑料

GB/T 34903的本部分規定了服役于石油與天然氣生產設備中的非金屬材料選用與評價的一般原則、基本要求、推薦做法以及產品質量保證指南。非金屬材料失效導致的設備損壞會造成公眾健康、人員安全與環境風險。本部分有助于避免設備發生這種高昂代價的腐蝕損壞。本部分補充而不是代替設備設計準則、標準或法律規范中已有的材料技術要求。GB/T 34903的本部分規定了石油天然氣工業中使用的熱塑性塑料材料類型、性能要求、制造要求、相容性評價方法和相容性技術指標判據。本部分適用于但不限于以下設備:非金屬管線、管道、襯里、密封件、墊圈和密封圈。本部分不一定適用于煉油化工或石油天然氣工業下游加工裝置及設備。

SY/T 5745-2008采油采氣工程詞匯

本標準規定了采油采氣工程常用詞匯。本標準適用于石油天然氣工業采油采氣工程領域，也適用于石油工業其他領域。

SY/T 5794-2010鉆井液用瀝青類評價方法

本標準規定了鉆井液用瀝青類產品揮發份、pH值、瀝青總量、水溶物含量、油溶物含量、電動電位、軟化點等的測定方法。本標準適用于鉆井液用瀝青類產品揮發份、pH值、瀝青總量、水溶物含量、油溶物含量、電動電位、軟化點等的測定。

SY/T 6615-2005鉆井液用乳化劑評價程序

本標準規定了鉆井液用乳化劑的技術要求及評價方法。 本標準適用于鉆井液用W/O型、O/W型乳化劑。

EN ISO 10416-2009石油和天然氣工業.鉆探泥漿.實驗室試驗

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or “make-up” fluid.

EN ISO 13628-1-2005石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和建議 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

DIN EN ISO 10414-2-2011石油和天然氣工業.鉆井液的現場測試.第2部分:油基液(ISO 10414-2-2011);英文版本EN ISO 10414-2-2011,僅限CD-ROM

This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-based drilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) oil, water and solids concentrations;e) alkalinity, chloride concentration and calcium concentration;f) electrical stability;g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations;h) low-gravity solids and weighting material concentrations.The annexes provide additional test methods or examples that can optionally be used for the determination of:- shear strength (Annex A);- oil and water concentrations from cuttings (Annex B);- drilling fluid activity (Annex C);- aniline point (Annex D);- lime, salinity and solids concentration (Annex E);- sampling, inspection and rejection (Annex F);- rig-site sampling (Annex G);- cuttings activity (Annex H);- active sulphides (Annex I);- calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances (Annex J);- permeability plugging apparatus with set-screw secured end cap (Annex K);- permeability plugging apparatus with threaded end cap (Annex L);- elastomer compatibility (Annex M);- sand content of oil-based fluid (Annex N);- identification and monitoring of weight-material sag (Annex O);- oil-based drilling fluid test report form (Annex P).

DIN EN ISO 10416-2010石油和天然氣工業.鉆井液.實驗室試驗

This International Standard provides procedures for the laboratory testing of both drilling fluid materials and drilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-based drilling fluids, as well as the base or make-up fluid.

DIN EN ISO 13628-1-2010石油和天然氣工業.水下生產系統的設計和操作.第1部分:一般要求和推薦規范(ISO 13628-1-2005 + Amd 1-2010).英文版本EN ISO 13628-1-2005 + A1-2010,只光盤版

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.

BS EN ISO 10414-2-2011石油和天然氣工業.鉆井液的現場測試.油基液

This part of ISO 10414 provides standard procedures for determining the following characteristics of oil-baseddrilling fluids:a) drilling fluid density (mud weight);b) viscosity and gel strength;c) filtration;d) oil, water and solids concentrations;e) alkalinity, chloride concentration and calcium concentration;f) electrical stability;g) lime and calcium concentrations, calcium chloride and sodium chloride concentrations;h) low-gravity solids and weighting material concentrations.The annexes provide additional test methods or examples that can optionally be used for the determination of:- shear strength (Annex A);- oil and water concentrations from cuttings (Annex B);- drilling fluid activity (Annex C);- aniline point (Annex D);- lime, salinity and solids concentration (Annex E);- sampling, inspection and rejection (Annex F);- rig-site sampling (Annex G);- cuttings activity (Annex H);- active sulphides (Annex I);- calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluidbalances (Annex J);- permeability plugging apparatus with set-screw secured end cap (Annex K);- permeability plugging apparatus with threaded end cap (Annex L);- elastomer compatibility (Annex M);- sand content of oil-based fluid (Annex N);- identification and monitoring of weight-material sag (Annex O);- oil-based drilling fluid test report form (Annex P).

BS EN ISO 10416-2009石油和天然氣工業.鉆探泥漿.實驗室試驗

This International Standard provides procedures for the laboratory testing of both drilling fluid materials anddrilling fluid physical, chemical and performance properties. It is applicable to both water-based and oil-baseddrilling fluids, as well as the base or “make-up” fluid.It is not applicable as a detailed manual on drilling fluid control procedures. Recommendations regardingagitation and testing temperature are presented because the agitation history and temperature have aprofound effect on drilling fluid properties.

BS EN ISO 13628-1-2005+A1-2010石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和推薦規范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.

BS EN ISO 23936-1-2009石油,石化和天然氣工業.與石油和天然氣生產相關的介質接觸的非金屬材料.第1部分:熱塑性塑料(ISO 23936-1-2009)

ISO 23936 as a whole presents general principles and gives requirements and recommendations for theselection and qualification, and gives guidance for the quality assurance, of non-metallic materials for service in equipment used in oil and gas production environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion failures of the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations.This part of ISO 23936 addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with production and chemical treatment. Interaction with sunlight is included; however, ionizing radiation is excluded from the scope of this part of ISO 23936.Furthermore, this part of ISO 23936 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers.