電主軸相關組件檢測

電主軸相關組件檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 34880.3-2018五軸聯動加工中心檢驗條件 第3部分:技術條件

GB/T 34880的本部分規定了五軸聯動加工中心的設計、制造、檢驗和驗收要求。本部分適用于線性行程至2 000 mm的五軸聯動加工中心(以下簡稱機床)。線性軸線行程超過2 000 mm的五軸聯動加工中心也可參照使用。

DIN 69888-2008旋轉工具設備的平衡用要求

This Standard specifies requirements for balancing of tool systems with interfaces HSK 25 to HSK 100 according to DIN 69063-1, DIN 69063-2, DIN 69063-5, DIN 69063-6, DIN 69893-1, DIN 69893-2, DIN 69893-5 and DIN 69893-6 on the basis of the particular operating speed. The interfaces HSK 125 and HSK 160 are not covered by this Standard, it is recommend to apply the limiting values for HSK 100. This Standard can be applied analogously to tool systems with interfaces and tool holders such as ABS, CAPTO, KM, SK and parallel shank. In this case allowance shall be made for the constructional characteristics of the interfaces and tool holders.

DIN EN 848-2-2013木工機械的安全性.帶旋轉工具的單面模壓機械.第2部分:單心軸手動進料/一體進料鏤銑機.德文版本EN 848-2-2007+A2-2012

This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single spindle hand fed/integrated fed routing machines with fixed head but allowing only movement along the axis of the tool during machining hereinafter referred to as \"machines\" designed to cut solid wood, chip board,fibreboard,plywood and also these materials if they are covered with plastic laminate,edgings or veneer when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

DIN EN 61360-4-2005電子元器件標準數據元素類型和相關分類模式.第4部分:IEC標準數據元素類型和元器件分類的基準集

This standard specifies:-the definitions of data element types for electric components and materials used in electrotechnical equipment and systems;-the definitions of the component classes with associated classification scheme

DIN EN 61800-7-201-2016可調速電驅動設備.第7-201部分:電驅動設備輪廓的通用接口和使用.1型輪廓規范(IEC 61800-7-201-2015).英文版本EN 61800-7-201-2016

This part of IEC 61800-7 specifies profile type 1 for Power Drive Systems (PDS). Profile type 1 can be mapped onto different communication network technologies.