熱塑性聚烯烴防水卷材檢測

熱塑性聚烯烴防水卷材檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 27789-2011熱塑性聚烯烴(TPO)防水卷材

本標準規定了熱塑性聚烯烴防水卷材的術語和定義、分類和標記、要求、試驗方法、檢驗規則、標志、包裝、貯存和運輸。本標準適用于建筑工程用的以乙烯和α烯烴的聚合物為主要原料制成的防水卷材。

GB/T 35468-2017種植屋面用耐根穿刺防水卷材

本標準規定了種植屋面用耐根穿刺防水卷材的術語和定義、分類和標記、一般要求、技術要求、試驗方法、檢驗規則及標志、包裝、運輸和貯存等。本標準適用于種植屋面用具有耐根穿刺性能的防水卷材，不適用于由不同類型的卷材復合而成的系統。

GB/T 35609-2017綠色產品評價 防水與密封材料

本標準規定了綠色建筑防水與密封材料的術語和定義、評價要求、評價方法。本標準適用于建筑防水卷材、防水涂料和密封膠的綠色產品評價。

GB 50681-2011機械工業廠房建筑設計規范

本規范適用于下列范圍：1 新建、擴建、改建的機械工業廠房及其附屬建筑的建筑設計；2 機械工業工廠中電離輻射室的建筑設計；3 機械工業工廠中電磁屏蔽室，屏蔽頻率為0.15MHz～30MHz利用建筑物增設屏蔽層的建筑設計。

GB 50693-2011坡屋面工程技術規范

為提高我國坡屋面工程技術水平，確保工程質量，制定本規范。本規范適用于新建、擴建和改建的工業建筑、民用建筑坡屋面工程的設計、施工和質量驗收。坡屋面工程的設計和施工應遵守有關環境保護、建筑節能和安全的規定，并應采取相應措施。 坡屋面工程應積極采用成熟的新材料、新技術、新工藝。坡屋面工程的設計、施工和質量驗收除應符合本規范外，尚應符合現行有關標準的規定。

JC/T 974-2005道橋用改性瀝青防水卷材

本標準規定了道橋用改性瀝青防水卷材的分類、要求、試驗方法、檢驗規則、標志、包裝、運輸與貯存。 本標準適用于以水泥混凝土為面層的道路和橋梁表面，并在其上面輔加瀝青混凝土層的改性瀝青聚酯胎防水卷材，其它用途如機場跑道、停車場也可參照使用。

JGJ 155-2013種植屋面工程技術規程

本規程適用于新建、既有建筑屋面和地下建筑頂板種植工程的設計、施工質量驗收和維護管理。

JGJ/T 181-2009房屋建筑與市政基礎設施工程檢測分類標準

本標準適用于房屋建筑和市政基礎設施工程檢測的分類。

JGJ/T 200-2010噴涂聚脲防水工程技術規程

本規程適用于混凝土和砂漿表面噴涂聚脲防水工程的材料選擇、設計、施工及驗收。

JGJ/T 212-2010地下工程滲漏治理技術規程

本規程適用于地下工程滲漏的治理。

JGJ/T 316-2013單層防水卷材屋面工程技術規程

本規程適用于新建、擴建和改建的工業建筑、民用建筑采用單層防水卷材的屋面工程的設計、施工及質量驗收。

DB11/ 366-2006種植屋面防水施工技術規程

根據北京市種植屋面發展的需要,為規范北京地區種植屋面防水施工及質量驗收,防治種植屋面滲漏,確保種植屋面防水工程質量及使用功能,制定本規程。本規程適用于新建或舊屋面改造的種植屋面防水工程及地下建筑頂板覆土種植防水工程。

DIN EN 13707-2013防水柔性板材. 屋頂防水用增強瀝青板. 特征和定義; 德文版本EN 13707-2013

This document specifies definitions and characteristics for flexible reinforced bitumen sheets for which the intended use is roofing. This covers sheets used as top layers, intermediate layers and underlayers. It does not cover reinforced bitumen sheets for waterproofing used as underlays for discontinuous roofing. It does not cover waterproofing sheets which are intended to be used fully bonded under bituminous products (e. g. asphalt) directly applied at high temperature.

DIN EN 13956-2013防水用柔性薄板.屋頂防水用塑料和橡膠薄板.定義和特征.德文版本EN 13956-2012

This European Standard specifies the definitions and characteristics of plastic and rubber sheets including sheets made out of their blends and alloys (thermoplastic rubber) for which the intended use is roof waterproofing. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard.

DIN EN 13969-2007防水用柔性薄板.包括瀝青底層制箱用薄板的瀝青防潮薄板.定義和特性

This document specifies definitions and characteristics of flexible reinforced bitumen sheets for which the intended use is as damp proofing for buildings. including basement tanking.It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this standard.

DIN EN 14576-2005土工合成織物.測定聚合土工合成織物阻擋層抗環境應力斷裂的試驗方法

This document specifies a test method for screening the resistance of polymeric geosynthetic barriers to stress cracking. The test is applicable to polypropylene and polyethylene based products and to all other polymeric geosynthetic barriers which have a partially crystalline structure.

DIN EN 14909-2012防水彈性薄板.塑料和橡膠防水進程.定義和特征.德文版本EN 14909-2012

This European Standard specifies the characteristics of flexible sheets of plastics and rubber intended for use as damp proof courses for buildings. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard. This European Standard does not cover related products such as preformed cavity trays, coping and flashings.

DIN EN 14967-2006防水用柔性薄板.瀝青防潮層.定義和特征

This European Standard specifies the characteristics of flexible sheets of bitumen intended for use as damp proof courses for buildings. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this European Standard. This European Standard does not cover related products such as preformed cavity trays coping and flashings. requirements for bitumen damp proof courses. The main addressed characteristics will be: water tightness, gas permeability, mechanical properties like the resistance to perforation or the impact resistance and the durability of those characteristics against chemical or biological agents and/or weathering.