歡迎訪問中科光析科學技術研究所官網!
免費咨詢熱線
400-635-0567
短距離設備; 25MHz至1000MHz頻率范圍的無線電設備; 工作在指定頻段的低占空比高可靠性警報設備檢測項目報價???解決方案???檢測周期???樣品要求? |
點 擊 解 答??![]() |
GB/T 15629的本部分規定了低速無線個域網的物理層和媒體訪問控制層的規范。這種低速無線接入適用于固定的、便攜的、移動的設備,這些設備不用電池或僅用非常有限的電池電源,并主要工作在有限的個人空間(0m-10m)。本部分不具體規定密碼算法,密碼算法的具體信息與密碼管理局聯系。本部分中提及的密碼算法僅作為示例。
GB/T 29261的本部分規定了自動識別和數據采集技術領域中無線電通信的專用術語和定義。本部分適用于無線電通信領域非用戶與專家進行交流。
GB/Z 36442的本部分給出了無源超高頻RFID標簽(以下簡稱“RFID標簽”)的選擇以及媒體、黏合劑、表面層、油墨選擇的指南;描述了減輕靜電放電以減輕RFID標簽損傷的技術。本部分給出了在可搬運的箱子和集裝箱、托盤/單元貨載物品及不可搬運的物品和不能用托盤裝運的物品上安置和附著RFID標簽的指南。本部分為用于物流應用中的RFID標簽及其包裝提供了指導。
本標準規定了短距離設備及類似設備的電磁照射的符合性要求。本標準適用于短距離設備及類似應用的無線設備。頻率范圍為10Hz至30MHz。類似產品例如無線電源設備、近場通信設備、射頻識別設備等可以參照本標準。
Recommendation ITU-R M.1453 – Transport information and control systems – Dedicated short range communications at 5.8 GHz, was approved at the Radiocommunication Assembly (RA) 2000. In August 2002, the RA approved a revision of the Recommendation as Recom
This Report considers interferences from devices using ultra-wideband (UWB) technology on radiocommunication services. As a main objective, it evaluates UWB e.i.r.p. density required for the protection of radiocommunication services.This Report also includes laboratory and field measurements on the impact of devices using UWB technology on radiocommunication services.
Taking into account that there are two general measurement approaches (time domain and frequencydomain) this Recommendation gives the appropriate techniques to be applied when measuring UWBtransmissions.
This European Standard specifies requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate. It also provides requirements forThe evaluation of conformity of the components toThe requirements of this European Standard. Where components work together andThis requires knowledge of the system design,This document also specifies requirements onThe system. WhenThe fire detection and fire alarm systems (FDAS) use wired and RF links,The relevant parts of EN 54 apply together withThis document. Requirements relevant to wire links are superseded or modified by those included inThis European Standard.This document does not restrict:the intended use of radio spectrum, e. g. frequency, power output of devices;The allowed maximum number of the components using RF links withinThe FDAS or one transmission path and/or RF link;The allowed maximum number of the components affected by loss of one transmission path and/or RF link.These requirements relate to national regulations and can vary from member state to member state.