燃?xì)馄骶哂米詣娱y檢測

燃?xì)馄骶哂米詣娱y檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 30597-2014燃?xì)馊紵骱腿紵骶哂冒踩涂刂蒲b置通用要求

本標準規定了使用GB/T 13611規定的城鎮燃?xì)獾娜細馊紵骱腿紵骶哂冒踩涂刂蒲b置及其組件(以下簡稱“控制裝置”)的術語和定義、分類和分組、結構和材料、要求、試驗方法、標識、安裝和操作說明書、包裝、運輸和貯存。本標準適用于以下控制裝置:--自動和半自動閥;--燃燒控制裝置;--熄火保護裝置;--燃?xì)夂涂諝獗壤{(diào)節裝置;--壓力調節裝置;--旋塞閥總成;--溫度控制裝置;--多功能控制裝置;--壓力傳感裝置;--閥門檢驗系統。

GB 35848-2018商用燃?xì)馊紵骶?/h2>

本標準規定了商用燃?xì)馊紵骶?以下簡稱燃具)的術語和定義，分類和型號，要求，試驗方法，檢驗規則，標志、警示和說明書，包裝、運輸和貯存。本標準適用于以符合GB/T 13611規定的燃?xì)鉃槟茉矗紵每諝馊∽允覂?nèi)、燃燒產物直接或間接排向室外的燃具，包括：a)　額定熱負荷不大于80 kW、蒸汽壓力不大于80 kPa，且設計正常水位水容積小于30 L的蒸汽發生器類燃具；b)　額定熱負荷不大于80 kW、蒸腔蒸汽壓力不大于500 Pa的蒸箱類燃具；c)　額定熱負荷不大于50 kW、腔體內壓力不大于80 kPa的炸爐類燃具；d)　額定熱負荷不大于50 kW的煮食爐類燃具；e)　額定熱負荷不大于80 kW、鍋口有效直徑不小于600 mm的大鍋灶類燃具；f)　額定熱負荷不大于10 kW的煲仔爐，額定熱負荷不大于50 kW的矮湯爐等平頭爐類燃具；g)　額定熱負荷不大于100 kW的常壓固定式沸水器類燃具；h)　燜飯量大于等于6L的飯鍋類燃具；i)　額定熱負荷不大于50 kW的洗碗機類燃具；j)　額定熱負荷不大于60 kW的炒灶類燃具；k)　額定熱負荷不大于50 kW的燒烤爐類燃具；l)　額定熱負荷不大于35 kW的熱板爐類燃具；m)　額定熱負荷不大于80 kW的烤箱類燃具；n)　以上產品的組合體。

GB/T 36699-2018鍋爐用液體和氣體燃料燃燒器技術條件

本標準規定了鍋爐用液體和氣體燃料燃燒器的分類與型號編制、組成與基本配置、基本要求、性能要求、設計與制造、檢驗、試驗與檢測、技術文件與標識、包裝、運輸和貯存、安裝、調試與使用等方面的技術要求。本標準適用于鍋爐用液體和氣體燃料的強制鼓風燃燒器和自然通風燃燒器。電站鍋爐啟動燃燒器、各類工業窯爐與工業加熱爐及其他用途燃燒器可參照本標準執行。

CJ/T 113-2015燃?xì)馊∨?/h2>

本標準規定了燃?xì)馊∨?以下簡稱取暖器)的術語和定義,分類與型號,結構和材料,要求,試驗方法,檢驗規則,標識和說明書,包裝、運輸和貯存。本標準適用于使用GB/T 13611規定的燃?xì)獾娜∨?包括:a) 額定熱輸入不大于20 kW的家用取暖器;b) 單個燃燒器額定熱輸入不大于120 kW的非家用取暖器。本標準不適用于室外使用的取暖器、冷凝式取暖器、專為工業用途設計的取暖器、在移動的運輸交通工具中使用的取暖器。

CJ/T 336-2010冷凝式家用燃?xì)饪焖贌崴?/h2>

本標準規定了加熱生活用水的冷凝式家用燃?xì)饪焖贌崴鞯姆诸惡托吞?、材料和結構、要求、試驗方法、驗收規則及標志和說明書、包裝、運輸和貯存。本標準適用于除人工煤氣之外符合GB/T 13611規定燃?xì)狻㈩~定熱輸入不大于70kW的強制排氣式冷凝熱水器、強制給排氣式冷凝熱水器和室外型冷凝熱水器。

CJ/T 451-2014商用燃?xì)馊紵骶咄ㄓ眉夹g(shù)條件

本標準規定了商用燃?xì)馊紵骶?以下簡稱燃具)的術語和定義,分類,結構和材料,要求,試驗方法,檢驗規則,標識、警示和使用說明書,包裝、運輸和貯存。本標準適用于商用廚房等使用,以符合GB/T 13611規定的燃?xì)鉃槟茉?安裝在室內、燃燒產物機械排至室外的燃燒器具。

ISO 23551-1-2012氣體燃燒器和燃?xì)庠O(shè)備安全性和控制裝置.詳細要求.第1部分:自動和半自動閥門

This part of ISO 23551 specifies safety, constructional andnperformance requirements and testing of automatic andnsemi-automatic shut-off valves for gas burners, gas appliances andnappliances of similar use.nIt applies ton— normally closed valves,n— valves being mounted upstream to gas burners and gasnappliances,n— valves with declared maximum working pressures up to andnincluding 500 kPa, for use on burners or in appliances using fuelngases as natural gas, manufactured gas or liquefied petroleum gasn(LPG),n— valves directly or indirectly actuated, electrically ornby mechanical means,n— valves actuated by hydraulic or pneumatic means,n— valves where the flow rate is controlled by externalnelectrical signals, either in discrete steps or proportional to thenapplied signal andn— valves fitted with closed position indicatornswitches.nThis part of ISO 23551 covers type testing only.

UL 372 (ND)-2007家用和類似用途自動電控制器.第2部分:燃燒器點火系統和組件的特殊要求

Automatic Electrical Controls for Household and Similar Use.Part 2: Particular Requirementsfor Burner Ignition Systems and Components

GSO ISO 23551-1-2016燃?xì)馊紵骱腿細馄骶叩陌踩涂刂蒲b置特殊要求第1部分：自動和半自動閥門

This part of ISO 23551 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic shut-off valves for gas burners, gas appliances and appliances of similar use. It applies to — normally closed valves, — valves being mounted upstream to gas burners and gas appliances, — valves with declared maximum working pressures up to and including 500 kPa, for use on burners or in appliances using fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG), — valves directly or indirectly actuated, electrically or by mechanical means, — valves actuated by hydraulic or pneumatic means, — valves where the flow rate is controlled by external electrical signals, either in discrete steps or propor-tional to the applied signal and — valves fitted with closed position indicator switches. This part of ISO 23551 covers type testing only.

NF G45-008-1-2008干洗機的安全要求.第1部分:公共安全要求

La présente partie de l'ISO 8230 spécifie les exigences générales de sécurité pour les machines de nettoyage à sec.Elle est applicable aux machines de nettoyage à sec de toutes les tailles, à usage industriel et commercial, prévues pour le nettoyage des articles faits en textile, en cuir, en peaux ou en fourrures, utilisant exclusivement le perchloroéthylène ou un solvant inflammable comme produit de nettoyage.La présente partie de l'ISO 8230 n'est pas applicable aux : machines de nettoyage à sec mises à la disposition du public (par exemple les libres-services) ; machines de nettoyage à sec barrière telles que définies en 3.1.5 ; machines de nettoyage à sec à transfert telles que définies en 3.1.4 ; presses à repasser (voir l'ISO 10472-1 et l'ISO 10472-6) ; équipements auxiliaires, par exemple les systèmes de renouvellement d'air du local ou de récupération des déchets provenant du distillateur, l'unité extérieure de refroidissement d'eau ou les systèmes de récupération complémentaires de solvant provenant des boues de distillation.La présente partie de l'ISO 8230 identifie tous les phénomènes dangereux significatifs résultant de l'utilisation de la machine de nettoyage à sec, ce qui comprend à la fois l'utilisation normale et les mauvais usages prévisibles, et inclut la fourniture, l'utilisation et la maintenance. Elle spécifie les exigences de sécurité communes pour les machines de nettoyage à sec et est destinée à être utilisée conjointement avec l'ISO 8230-2 et l'ISO 8230-3, selon le cas. Les exigences spécifiques de l'ISO 8230-2 et de l'ISO 8230-3 prévalent sur les exigences correspondantes de la présente partie de l'ISO 8230.

DIN EN 303-7-2007加熱鍋爐.第7部分:用標稱熱輸出功率小于1000 kW的強排風燃爐裝備的燃?xì)庵醒爰訜徨仩t

This European Standard specifies the requirements and test methods for the contruction,the safety and the rational energy usage for gas-fired standard and low temperature central heating boilers equipped with a forced draught burner.These boilers comprise a boiler body and a forced draught gas burner brought together at the producer's assembly facility,the whole being disigned and marketed as a complete boiler.This standard does not apply to the case of the assembly of a boiler body and a forced draught gas burner designed and marketed separately.In this case,EN 303-3 applies.This European Standard applies to type B boilers with a nominal heat output not exceeding 100 kw with a water temperature at normal operation not exceeding 105°C and with a maximum water-side operating pressure not exceeding 8 bar.This European Standard does not contain all the necessary requirements for:- condensing boilers and combination boilers;- boilers intended to be installed in the open;- boilers permanently fitted with more than one flue outlet;- boilers intended to be connected to a common flue having mechanical extraction;- boilers equipped with several combustion chambers.This European Standard does not apply to living-space dedicated boilers(see 3.6).This European Standard only covers type testing.

DIN EN 746-2-2011工業熱處理設備.第2部分:燃燒和燃料處理系統的安全要求;德文版本EN 746-2-2010

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE).This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.This European Standard covers:- fuel pipework downstream of and including the manual isolating valve;- burner(s), burner system and ignition device;- safety related control system (protective system).This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy.For thermal or catalytic post combustion and waste incineration, this European Standard applies only to auxiliary burners designed to start-up and/or support the process.The pressure hazard of piping and components covered by this standard is within the limits of maximum pressure/size relationship as described in normative Annex E.This European Standard also gives the necessary requirements for the information for use.This European Standard does not cover hazards from heating generated by electricity.This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE.This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system.Noise can be a significant hazard for combustion and fuel handling systems. It is not dealt with in this standard.This European Standard is not applicable to combustion and fuel handling systems as part of IThE which is manufactured before the date of its publication as EN.

DIN EN 1266/A1-2005用電扇助燃燒空氣或煙氣流動的獨立式燃?xì)鈱α骷訜崞?；德國?EN 1266-2002/A1-2005

This European Standard (EN 1266:2002/A1:2004) has been prepared by Technical Committee CEN/TC 62"Independent gas-fired space heaters", the secretariat of which is held by BSI.This Amendment to the European Standard EN 1266:2002 shall be given the status of a national standard, eitherby publication of an identical text or by endorsement, at the latest by February 2006, and conflicting nationalstandards shall be withdrawn at the latest by February 2006.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

DIN EN 1596-2005專用于液化石油器的規范.移動式和便攜式非家用強制對流直燃式空氣加熱器

The change A1 of EN 1596 concerns several technical amendments due to need for regulation appearing after ratification of the standard. The standard itself defines for the purpose of type approval the safety characteristics, the test methods and the marking of mobile, non-domestic forced convection direct fired air heaters with a nominal heat input of up to 180 kW (HS) for the combustion of 3rd family gases (liquefied petroleum gases). Most significant technical change stipulated by this draft ist the lowering of the air delivery temperature from 80 °C to 55 °C.

DIN EN 14829-2007不超過6kW的普通供熱用獨立式燃?xì)鉄o煙筒對流加熱器

This document specifies, for the purpose of type examination, the requirements and test methods for construction, safety, marking and rational use of energy of 2ne and 3rd family gas-fired domestic flueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorific value). It covers the following Type AAS fixed flueless heaters: NOTE These are type A appliances fitted with an atmosphere sensing device, with or without a fan. a) heaters with or without a catalytic converter; b) Category 1 appliances burning gases of the second family; c) Category 2 appliances burning gases of the second and third families. It does not cover qi. Mobile heaters.ii. Category 1 appliances burning gases of the third family.iii. Portable flueless heaters.iv. Diffusive catalytic combustion heaters. There are no specific thermal efficiency requirements appropriate to these types of appliance as: -- All the heat produced by the combustion process is released into the space to be heated. -- The requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas. This standard is only applicable to appliances which are to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.