燃氣設備用多功能控制裝置檢測

燃氣設備用多功能控制裝置檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 30597-2014燃氣燃燒器和燃燒器具用安全和控制裝置通用要求

本標準規定了使用GB/T 13611規定的城鎮燃氣的燃氣燃燒器和燃燒器具用安全和控制裝置及其組件(以下簡稱“控制裝置”)的術語和定義、分類和分組、結構和材料、要求、試驗方法、標識、安裝和操作說明書、包裝、運輸和貯存。本標準適用于以下控制裝置:--自動和半自動閥;--燃燒控制裝置;--熄火保護裝置;--燃氣和空氣比例調節裝置;--壓力調節裝置;--旋塞閥總成;--溫度控制裝置;--多功能控制裝置;--壓力傳感裝置;--閥門檢驗系統。

GB 50016-2014(2018)建筑設計防火規范(2018年版)

本規范適用于下列新建、擴建和改建的建筑：廠房；倉庫；民用建筑；甲、乙、丙類液體儲罐(區)；可燃、助燃氣體儲罐(區)；可燃材料堆場；城市交通隧道。人民防空工程、石油和天然氣工程、石油化工工程和火力發電廠與變電站等的建筑防火設計，當有專門的標準時，宜從其規定。本規范不適用于火藥、炸藥及其制品廠房(倉庫)、花炮廠房(倉庫)的建筑防火設計。

GB/T 50680-2012城鎮燃氣工程基本術語標準

本標準規定了燃氣工程技術的基本術語，適用于城鎮燃氣工程及相關領域。

CJ/T 451-2014商用燃氣燃燒器具通用技術條件

本標準規定了商用燃氣燃燒器具(以下簡稱燃具)的術語和定義,分類,結構和材料,要求,試驗方法,檢驗規則,標識、警示和使用說明書,包裝、運輸和貯存。本標準適用于商用廚房等使用,以符合GB/T 13611規定的燃氣為能源,安裝在室內、燃燒產物機械排至室外的燃燒器具。

JGJ 57-2016劇場建筑設計規范

本規范適用于新建、擴建和改建的劇場建筑設計。

AQ 7002-2007紡織工業企業安全管理規范

本規范規定了紡織工業企業安全管理的基本要求。 本規范適用于各類紡織工業企業。

DB11/T 302-2005燃氣輸配工程設計施工驗收技術規定

本規定適用于北京市居民生活、商業、工業企業、采暖通風和空調等用燃氣作燃料的新建、擴建r或改建的燃氣輸配工程的設計、施工及驗收

UL 1776-2002高壓清洗機

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.

EN 30-1-1-2008家用燃氣灶具.第1-1部分:安全性.一般性;包含修改件A1-2010

This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as "appliances".This European Standard covers the following types of domestic cooking appliances, as defined in Clause 3, and belonging to the classes defined in 4.3 (see Table 1): independent freestanding hotplates; independent built-in hotplates; independent hotplates and grills; table cookers; freestanding ovens; built-in ovens; freestanding or built-in grills; griddles; freestanding cookers; built-in cookers. Unless specifically excluded hereafter,This European Standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e. g. combined gas-electric cookers).This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically-heated component parts or their associated equipment1).This European Standard does not apply to: a) outdoor appliances; b) appliances connected to a combustion products evacuation duct; c) appliances having a pyrolitic gas oven; d) appliances having covered burners which are not in conformity with the constructional requirements of 5.2.8.2.2; e) appliances incorporating flame supervision devices and having an automatic ignition device for which the duration of the ignition attempt is limited by design; f) appliances equipped with a burner that is periodically ignited and extinguished under the control of an automatic on/off device; 1) Refer to the electrical safety rules. g) appliances equipped with an oven and/or with a grill having a fan: 1) either for the supply of combustion air or for the evacuation of the products of combustion; 2) or for the circulation of the products of combustion within the compartments; h) appliances supplied at pressures greater than those defined in 7.; i) appliances having one or more burners that are capable of remote operation (type1 or type 2), unless the burner(s) concerned are thermostatically controlled oven burners of time-controlled ovens that are designed for a delayed start without the user being present; j) appliances incorporating one or more hotplate or grill burners that enable the user to program the cooking cycle, including the start and/or the end of the cycle.This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.This European Standard only covers type testing.

NF D35-354-2008專用液化石油氣裝置用規范.家用無煙道空間加熱器(包括擴散式催化燃燒加熱器)

La présente Norme européenne spécifie les prescriptions, les méthodes d'essais et le marquage des appareils domestiques de chauffage non raccordés à un conduit d'évacuation des produits de la combustion, y compris les appareils à combustion catalytique diffusive, dont le débit calorifique nominal est inférieur à 4,2 kW (HS), alimentés par des gaz de la 3e famille sous la pression nominale de service ne dépassant pas 50 mbar, désignés dans le texte par "appareils".La présente Norme européenne est applicable aux types d'appareils suivants : appareils fixes fonctionnant au butane commercial et/ou au propane commercial ; appareils portatifs ou mobiles fonctionnant soit au butane commercial, soit au butane commercial et au propane commercial, y compris ceux qui ont un compartiment d'installation pour une bouteille portative rechargeable de gaz de pétrole liquéfié.Aucune prescription particulière concernant le rendement thermique n'est définie pour ces types d'appareils car toute la chaleur produite par le processus de la combustion se dégage dans l'espace à chauffer ; les exigences concernant la combustion, qui relèvent de la sécurité, garantissent la combustion du combustible gazeux.La présente Norme européenne ne concerne pas les appareils incorporant des dispositifs électriques de contr?le du gaz.L'annexe A donne les détails concernant les catégories d'appareils commercialisées dans les divers pays.Les exigences pour les appareils données dans cette norme européenne supposent que l'alimentation en gaz à partir de la bouteille soit contr?lée par un détendeur dont la pression nominale maximale de détente atteint 50 mbar.La présente norme européenne ne concerne pas les bouteilles de gaz de pétrole liquéfié, ni leurs détendeurs associés, ni les tubes et tuyaux flexibles, qui doivent être conformes aux réglementations nationales en vigueur. La présente norme couvre uniquement les essais de type.

DIN EN 126-2012燃氣設備用多功能控制裝置

This European Standard specifies the safety, construction and performance requirements for multifunctional controls intended for use with gas burners, gas appliances and similar use, hereafter referred to as "MFC". This European Standard is applicable to MFC with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 150 for use with one or more fuel gases in accordance with EN 437. MFC consist of two or more functions, at least one of which is a mechanical control, as specified in the relevant control standards (see Figure 1). MFC consisting only of electronics are not covered by EN 126 (an example is a combination of functions according to EN 298 and EN 1643).

DIN EN 449-2008專用液化石油氣裝置用規范.無排氣口的居室暖器(包括擴散催化燃燒的加熱器)

This European Standard specifies the requirements, the test methods and the marking of domestic flueless spaceheaters, including diffusive catalytic combustion heaters, having a nominal heat input (Hs), not exceeding 4,2 kWburning 3rd family gases at nominal operating pressures not exceeding 50 mbar. referred to in the text as'appliances'.This European Standard is applicable to the following types of appliances:a) fixed heaters burning commercial butane and/or commercial propane;b) portable or mobile heaters burning either commercial butane, or, commercial butane and commercial propane including those that incorporate a LPG container installation compartment for a transportable refillable liquefied petroleum LPG container.There are no specific thermal efficiency requirements appropriate to these types of appliance as:c) all the heat produced by the combustion process is released into the space to be heated;d) the requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas.It does not cover appliances incorporating electrically operated gas control systems.Annex A gives the details of the categories of appliances marketed in various countries.Requirements for appliances given in this standard assume that the supply of gas from the container will begoverned by a pressure regulator having a maximum nominal outlet pressure of 50 mbar.This European Standard does not cover LPG containers for liquefied petroleum gas neither their associatedregulator nor tubing and flexible hoses which shall comply with national requirements in force.This European Standard only covers type testing.

DIN EN 1596-2005專用于液化石油器的規范.移動式和便攜式非家用強制對流直燃式空氣加熱器

The change A1 of EN 1596 concerns several technical amendments due to need for regulation appearing after ratification of the standard. The standard itself defines for the purpose of type approval the safety characteristics, the test methods and the marking of mobile, non-domestic forced convection direct fired air heaters with a nominal heat input of up to 180 kW (HS) for the combustion of 3rd family gases (liquefied petroleum gases). Most significant technical change stipulated by this draft ist the lowering of the air delivery temperature from 80 °C to 55 °C.

DIN EN 14829-2007不超過6kW的普通供熱用獨立式燃氣無煙筒對流加熱器

This document specifies, for the purpose of type examination, the requirements and test methods for construction, safety, marking and rational use of energy of 2ne and 3rd family gas-fired domestic flueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorific value). It covers the following Type AAS fixed flueless heaters: NOTE These are type A appliances fitted with an atmosphere sensing device, with or without a fan. a) heaters with or without a catalytic converter; b) Category 1 appliances burning gases of the second family; c) Category 2 appliances burning gases of the second and third families. It does not cover qi. Mobile heaters.ii. Category 1 appliances burning gases of the third family.iii. Portable flueless heaters.iv. Diffusive catalytic combustion heaters. There are no specific thermal efficiency requirements appropriate to these types of appliance as: -- All the heat produced by the combustion process is released into the space to be heated. -- The requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas. This standard is only applicable to appliances which are to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

DIN EN 15033-2007車輛和船舶用液化石油氣生產衛生熱水儲水加熱器封閉室

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment, classification and marking of room sealed storage water heaters for the production of sanitary hot water using LPG for:— vehicles as defined in article 1 of Directive 70/156/EEC (see 3.12);— caravan holiday homes;— agricultural, forestry and mobile machinery, and— boats;hereafter called "appliance".This standard applies to appliances:?— type Ci, €3 and Cs (room sealed, see CEN/TR 1749) with combustion air intake and outlet for the products of combustion (combined or not) in the wall or roof;— fitted with atmospheric burners;— appliances fitted with or without a fan on the combustion circuit;— using LPG at the pressure ^BPOO) indicated in EN 437, (for caravan holiday homes and boats see Annex A);— of nominal heat input not exceeding 7 kW (//,);— appliances whether connected to the water mains pressure or on board water supply;— appliances using, where appropriate, 12 V or 24 V DC electrical supply (or appliances with an additional230 V heating element).This standard does not contain all the necessary requirements for:— appliances which fulfil a dual purpose role of space heating and heating water for sanitary hot water use.This standard covers type testing only.

BS 5990-2006額定熱輸入在330 kW－2 MW之間的工業和商業空間加熱用直接燃氣式強制對流空氣加熱器規范.安全性和性能要求（不包括電氣要求）（第2版）

This British Standard gives detailed requirements, including safety andperformance requirements and methods of test, for direct gas firedforced convection air heaters having heat inputs greater than 330 kWbut not exceeding 2 MW, intended for industrial and commercialapplications. Appliances covered by this standard are not intended forinstallation in domestic dwellings.The scope of this standard includes direct gas fired forced convectionair heaters for use both with and without ducting, and intendedprimarily for space heating applications. It therefore includes airheaters designed to provide make-up air, door curtain heaters, spraybooth heaters, portable air heaters and direct fired air heaters capableof providing full space heating.This standard specifies the requirements for direct gas fired forcedconvection air heaters designed for permanent outdoor installation. Italso specifies the requirements for transportable direct gas fired forcedconvection air heaters.This standard applies to appliances designed to operate on normal lowpressure district supplies of 2nd family gas.For appliances fitted with gas boosters, additional requirements mayapply.

BS 5991-2006額定熱輸入在330 kW－2 MW之間的工業和商業空間加熱用直接燃氣式強制對流空氣加熱器規范.安全性和性能要求（不包括電力需求）（第2版）

This British Standard specifies detailed requirements, including safetyand performance requirements and methods of test, for indirect gasfired forced convection air heaters having heat inputs greaterthan 330 kW but not exceeding 2 MW, intended for industrial andcommercial applications. Appliances covered by this standard are notintended for installation in domestic dwellings.The scope of this standard includes indirect gas fired forced convectionair heaters for use both with and without ducting, and intendedprimarily for space heating applications.This standard also specifies the requirements for indirect gas firedforced convection air heaters designed for permanent outdoorinstallation.It applies to appliances designed to operate on normal low pressuredistrict supplies of 2nd family gas.For appliances fitted with gas boosters and/or flue dampers, additionalrequirements may apply.This standard does not apply to portable and transportable indirect gasfired forced convection air heaters.

BS EN 88-2-2007燃氣器具用壓力調節器和相關的安全裝置.第2部分:入口壓力大于500毫巴、小于等于5巴的壓力調節器

This European Standard specifies the safety, construction and performance requirements for pressureregulators (hereafter referred to as regulators) intended for use with gas burners and gas-burningappliances using fuel gases of the 1st, 2nd and 3rd families. This European Standard covers typetesting only. It also provides additional information for the purchaser and user.This European Standard is applicable to regulators that may be tested independently of gas burnersand gas-burning appliances, which have a declared working pressure from above 500 mbar up to andincluding 5 bar.This European Standard is also applicable to regulators incorporating safety devices.NOTE 1 For safety accessories and pressure accessories, the requirements of EN 13611:2007, Annex F alsoapply.NOTE 2 Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1.Regulators intended to be used on pipe work installations for third family gases are also covered byEN 13785 and EN 13786.This European Standard is not applicable to:a) pressure regulators that are connected directly to mains pipe-work or to a container thatmaintains a standard distribution pressure;b) pressure regulators which use electrical auxiliary energy.