投影機用燈泡檢測

投影機用燈泡檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB 30533-2014學校安全與健康設計通用規范

本標準規定了學校健康安全的管理、計劃和設計、教學工作環境、服務、教學區域設備、工具和加工有關健康安全的通用要求。本標準適用于普通中小學校、中等職業學校。大學和相關機構可參照執行。

GB 32028-2015投影機能效限定值及能效等級

本標準規定了投影機的能效限定值、節能評價值、能效等級、試驗方法和檢驗規則。本標準適用于以投影為主要功能，高壓汞燈或金屬鹵化物燈為光源的液晶顯示(LCD)和數字光學處理(DLP)投影機。固態光源投影機和以硅基液晶(LCOS)為顯示器件的投影機等可參照執行。本標準不適用于投影屏幕與投影機組成的一體式投影單元和用于影院放映的投影機。

GB 50464-2008視頻顯示系統工程技術規范

本規范適用于視頻顯示系統工程的設計、施工及驗收。

JTG/T D71-2004公路隧道交通工程設計規范

為規范公路隧道交通工程設計，統一公路隧道交通工程設計要求，確保公路隧道行車安全，保證其運營暢通和服務水平，使公路隧道交通工程設計達到設計合理、技術先進、經濟適用、質量確保的目的，特制訂本規范。規范適用于高速公路、一、二級公路的新建隧道和改建隧道，三、四級公路的新建隧道和改建隧道可參考使用。

SJ/T 11346-2015電子投影機測量方法

本標準規定了電子投影機的術語和定義、測量條件、測量項目、測量方法、測量結果表述等。本標準適用于電子投影式固定分辨力投影機(以下簡稱投影機)，包括液晶顯示(LCD)、硅基液晶(LCoS)、數字光學處理(DLP)投影機等。其他投影方式、不同場合使用的電子投影機可參照執行。

SJ/T 11644-2016激光微投影機通用規范

本標準規定了激光微投影機(以下簡稱微投影機)的技術要求、測試方法、檢驗規則、標志、包裝、運輸、貯存等。本標準適用于激光微投影機的設計、制造和檢驗，其他類似功能的微投影機也可參照采用。

SJ 21460-2018軍貿電子系統備件目錄編制要求

本標準規定了軍貿電子系統在壽命周期內備件目錄的目錄分類、內容組成和格式編排等。本標準適用于軍貿電子系統備件目錄(以下簡稱備件目錄)的編制。

SN/T 3246.4-2017進出口音視頻設備檢驗技術要求 第4部分:投影儀的能效

SN/T 3246的本部分規定了投影儀的能效要求、測量方法和結果判定。本部分適用于以投影為主要功能，高壓汞燈或金屬鹵化物燈為光源的投影儀，固態光源投影儀和以LCOS為顯示器件的投影儀等可參照執行。本部分不適用于投影屏幕與投影儀組成的一體式投影單元和用于影院放映的投影機。

YD/T 1806-2008基于IP的遠程視頻監控設備技術要求

本標準規定了基于IP的遠程視頻監控系統的各組成設備，包括前端監控設備、監控管理平臺、運營支撐平臺、監控中心和遠程監控客戶端的功能、性能指標、接口、通信協議、流程以及系統的安全、雷擊和環境要求等。本標準適用于基于IP的運營級遠程視頻監控系統的設備。

JB/T 12107-20155D動感模擬系統.技術條件

本標準規定了5D動感模擬系統(以下簡稱5D系統)的術語和定義、技術要求、試驗方法以及運輸、貯存。本標準適用于5D動感模擬系統。

CNS 14466-18-2000視聽.影像及電視設備與系統-第18部：視聽?wèi)?yīng)用具內建三端閘流體之自動幻燈片投影機之連接器

本標準規定具內建三端閘流體（triacs）與藉由隔離變壓器工作之低電壓投射燈泡的自動式幻燈片投影機之互連與系統控制要求。對聚焦與幻燈片之前進后退之基本遙控，依 CNS_（IEC 61938）及 CNS l4466-3 表 5 所述 130-9 IEC 型式 l7（6 極 240）之規定。本標準所述遙控功能包括

UL 1573-2003舞臺和演播室照明設備和聯結帶

These requirements cover portable and fixed lighting units and accessories, intended for use in stage or studio applications.

DIN 56920-4-2013娛樂技術.第4部分:照明設備術語

This standard defines terms for lighting equipments being used in fixed and mobile event and production venues.

DIN EN 572-2-2012建筑用玻璃. 基本鈉鈣硅酸鹽玻璃制品. 第2部分: 浮法玻璃; 德文版本EN 572-2-2012

This Part of this European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass, as defined in EN 572-1, for use in building. This Part of this standard applies only to float glass supplied in jumbo sizes (see note 1), split sizes (see note 2) and oversize plates (see note 3). NOTE 1 Jumbo sizes - PLF (plateau largeur de fabrication) - Bandmasse. NOTE 2 Split sizes - DLF (dimension largeur de fabrication) - Geteilte Bandmasse. NOTE 3 Oversize plates - these are plates where the nominal length, H, is greater than the 6 000mm. These plates are produced to special order. EN 572-8 gives information on float glass in sizes i.e. supplied and final cut sizes other than those covered by this Part,

DIN EN 572-8-2016建筑用玻璃.基本鈉鈣硅酸鹽玻璃產品.第8部分:供貨和終切割尺寸.德文版本EN 572-8-2012+A1-2016

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for basic soda lime silicate glass products, as defined in EN 572-1:2012, for use in building. It applies to supplied sizes or cut sizes for final end use.This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.This European Standard does not apply to float glass supplied as jumbo, split sizes or oversize plates nor to polished wired glass, drawn sheet glass, patterned glass, patterned wired glass supplied as stock sizes. For specifications regarding these types of glass, see EN 572-2:2012, EN 572-3:2012, EN 572-4:2012, EN 572-5:2012 and EN 572-6:2012 respectively.This European Standard does not apply to final cut sizes of wired or unwired channel shaped glass For specifications on this type of glass, see EN 572-7:2012.

DIN EN 12368-2015交通控制設備.信號器.德文版本EN 12368-2015

This European Standard applies to signal heads with one or more signal lights of the colours red, yellow and/or green signal lights for road traffic with 200 mm and 300 mm roundels and to optical units to be integrated in signal heads to produce the individual signal lights. It defines the product characteristics for the visual, structural, environmental performances and testing of signal heads and optical units for pedestrian and road traffic use.

DIN EN 61747-1-2003液晶和固態顯示器件.第1部分:總規范

This part of IEC 61747 is a generic specification for liquid crystal and solid-state display devices. It defines general procedures for quality assessment to be used in the IECQ system and gives general rules for measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.

BS 4422-2005火災.詞匯

This standard defines terms specific to, and in general use by, fire protection agencies.Fire safety engineering and fire testing terms are covered in BS EN ISO 13943.This standard does not include terms where the standard dictionary definition is applicable. Neither does it include terms and definitions which are unique to any small specialized discipline within fire safety.

BS 6100-7-2008建筑和土木工程.詞匯.第7部分:設備

This part of BS 6100 defines terms for the systems, installations andequipment that:a) provide water, electricity, heat, warm air and gases;b) facilitate internal communication and transport, lighting and wasteremoval.This standard does not define terms outside the curtilage of premises,e.g. water supply and public health engineering, which are both coveredin BS 6100-6.