歡迎訪問中科光析科學技術研究所官網!
免費咨詢熱線
400-635-0567
處理醫療材料用滅菌器和清洗消毒器檢測項目報價???解決方案???檢測周期???樣品要求? |
點 擊 解 答??![]() |
Cet article de la Partie 1 est applicable, à l'exception de ce qui suit:
This Standard specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4. .
This standard specifies requirements and the appropriate tests for the installation of steam sterilizers and their supply of resources. It also includes requirements for the environmental conditions and for the operator in the sterilization of medical devices with moist heat. NOTE 1 Some places of this standard indicate to any requirements of specific product information on the installation and operation of steam sterilizers. NOTE 2 Although the scope of this standard is limited to medical devices, it specifies requirements and provides guidance that may apply to other products, devices and applications. Sections 5.2, 5.4 and 5.8 of this standard are not usually on small sterilizers in accordance with DIN EN 13060 apply. This standard supports the requirements of DIN EN ISO 17665-1. NOTE 3 DIN EN 285 and DIN EN 13060 requiremen technical requirements and requirements for carrying out the tests for steam sterilizers for use in health care facilities. This draft standard contains no requirements relating to occupational safety and safeguards of the sterilizer. It assumes, however, that are designed to operate such facilities available and operational. NOTE 4 Attention is drawn to the Medical Devices Operator Ordinance and the Ordinance on Industrial Safety. This draft standard contains no requirements for technical properties and the use of failure-detection systems. NOTE 5 At the present time no generally accepted performance criteria for failure-detection systems. failure-warning systems are in practice also been referred to as eg "Batch monitoring systems."
This standard applies to steam disinfection apparatus primarily used for medical purposes. It also applies to the steam disinfection of waste produced in public or private healthcare facilities, provided that this waste has to be specially treated in order to prevent infection, i. e. waste that has to be treated according to § 10a of the Federal Epidemics Act (BSeuchG) (so called waste of group C).
This European Standard specifies the requirements and the relevant tests for automatically controlled sterilizers employing ethylene oxide (EO) gas as the sterilant, either as a pure gas or a mixture with other gases, being used for the sterilization of medical devices and their accessories. This European Standard specifies requirements for ethylene oxide sterilizers (EO-sterilizers) working at super or sub-atmospheric pressure for:
This European Standard specifies requirements and tests for LTSF sterilizers, which use a mixture of low temperature steam and formaldehyde as sterilizing agent, and which are working below ambient pressure only. These sterilizers are primarily used for the sterilization of heat labile medical devices in health care facilities. This European Standard specifies minimum requirements:
This part of ISO 15883 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice. It specifies performance requirements for cleaning and disinfection as well as for the accessories which can be required to achieve the necessary performance. The methods and instrumentation required for validation, routine control and monitoring and re-validation, periodically and after essential repairs, are also specified.
This part of ISO 15883 specifies particular requirements for washer-disinfectors (WDs) intended for use when the level of assurance of disinfection that is necessary can be achieved by cleaning and thermal disinfection (A0 not less than 60) and does not require an independent automated record of critical processes to be kept. It is intended to be used in conjunction with ISO 15883-1, which gives general requirements for WDs. The range of products on which WDs of this particular type can be used is restricted to devices and equipment which are non-invasive and non-critical (i.e. not penetrating skin or contacting mucosal surfaces). NOTE Thermal disinfection can be achieved by rinsing the load with hot water, exposure to steam or combination of the two.
1.1.1 This part of ISO 17665 specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices.NOTE Although the scope of this part of ISO 17665 is limited to medical devices, it specifies requirements and provides guidance that may be applicable to other health care products.1.1.2 Moist heat sterilization processes covered by this part of ISO 17665 include but are not limited to:a) saturated steam venting systems;b) saturated steam active air removal systems;c) air steam mixtures;d) water spray;e) water immersion. NOTE See also Annex E.
1 ????? ??n??? ???? ?1?? ? ?? ??? ? ??:n1.1.1 ??? ???? n??n??:n?? ???? ???? ????.n? ??? ??, ???, ?? ? ??? ??? ??, n?? ? ??? ???? ????? 1.4? ?? ??? ?? ???? ? ??? ????? ????.n?? ?? ??? ?? n??? ????:na) ?? ?/?? ??? ???? ???? ???? ???nb) ?? ??, ?? ???? ?? ?? n??? ???? ???? ???? ???nc) ??? ?? ?? ??? ??? ??? ???? ???? ???? ??? nd) n?????