便攜式電氣控制或調節設備檢測

便攜式電氣控制或調節設備檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 5226.33-2017機械電氣安全 機械電氣設備 第33部分:半導體設備技術條件

GB/T 5226的本部分規定了半導體設備相關的制造、測量、組裝和測試的電氣、電子和可編程電子設備及系統的安全要求。本部分所論及的設備是從機械電氣設備的電源引入處開始的(見5.1)。本部分適用的電氣設備或電氣設備部件，其標稱電壓不超過1 000 Va.c.或1 500 Vd.c.，額定頻率不超過200 Hz。對于更高的電壓或頻率，可能需要特殊的要求。本部分包括針對電氣安全隱患的防護措施和針對非電氣安全隱患的電氣聯鎖保護電路，但不涵蓋由其他標準或法規規定的對人身安全保護的所有要求(如化學品危險、機械危險、輻射危害)。每種類型的機械適應其特定要求以提供足夠的安全。下列半導體制造設備的電氣裝置應提供附加和特殊技術要求：——使用、加工或生產易爆材料；——在易燃易爆環境中使用；——當生產或使用某種材料時有特殊風險；——作為起重機械(包括在IEC 60204-32)。本部分不包括半導體設備的性能或功能特性規范。本部分不涉及對人類健康可能造成影響的源于半導體設備的排放(如電磁場，噪聲)。本部分沒有規定電磁兼容性(EMC)的要求。

GB/T 51188-2016建筑與工業給水排水系統安全評價標準

本標準適用于新建、擴建、改建和既有建筑與工業的給水排水系統安全評價。本規范不適用于軍工等特殊行業建筑與工業的給水排水系統安全評價。

AS_NZS 3197-2005認證和測試規范便攜式電氣控制或調節設備

This Standard specifies essential safety requirements for portable electrical control or conditioning devices as defined in Clause 4 below, which are designed for operation at low voltage and which have a maximum operating current not exceeding 20 A.Typical examples of devices having a control or conditioning function are those which incorporate energy regulators, speed controllers, timing devices, photoelectric devices, devices actuated by sound or radiofrequency, devices actuated by signals or impulses generated remotely by manual or automatic means, movement detectors, lighting dimmers, temperature-sensitive devices, overcurrent protection devices of either the manual or automatically resetting type, voltage/frequency conditioning devices and filtering devices.Plugs complying with AS/NZS 3112, cord extension sockets complying with AS/NZS 3120, socket-outlet adaptors complying with AS/NZS 3122 and cord extension sets complying with AS/NZS 3199, which incorporate control or conditioning functions are within the scope of this Standard.This Standard does not apply to the following:(a) Control or conditioning devices which are incorporated in an appliance.(b) Portable residual current (earth-leakage) devices within the scope of AS/NZS 3190.(c) Portable devices incorporating voltage transformation within the scope of the AS/NZS 61558 (all parts).(d) Appliance connectors incorporating control facilities within the scope of AS/NZS 60320.1.(e) Plugs complying with AS/NZS 3112, cord-extension sockets complying with AS/NZS 3120 and socket-outlet adaptors complying with AS/NZS 3122 which incorporate indicating devices, e.g. neons, light-emitting diodes.(f) Plugs complying with AS/NZS 3112 incorporating fuses.(g) Electrical portable outlet devices complying with AS/NZS 3105.NOTE: Thermostats and energy regulators of the self-contained type but intended for independent mounting are within the scope of AS/NZS 3161.

UL 399-2008飲用水冷卻器

1.1 These requirements cover self-contained drinking-water coolers which employ hermetic refrigerantmotor-compressors and which are designed for connection to alternating-current circuits rated not greaterthan 600 volts in accordance with the National Electrical Code, NFPA 70. The requirements also apply towater coolers which supply both hot and cold water.1.2 These requirements do not include additional requirements applicable to equipment designed for usein hazardous locations as defined in the National Electrical Code, NFPA 70.1.3 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-productrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.

UL 935-2001熒光燈鎮流器

1.1 These requirements cover ballasts of the resistance, reactance, and electronic (high frequency) types for use with fluorescent lamps involving a potential of 2500 volts or less in accordance with the National Electrical Code, ANSI/NFPA 70.1.2 A fluorescent-lamp ballast may be determined by investigation to be acceptable for use, in a fixtureor other device, with electric-discharge lamps of other than the fluorescent type.1.3 Fluorescent self ballasted lamps and ballast adaptors are evaluated using the Standard forSelf-Ballasted Lamps and Lamp Adapters, UL 1993. The component ballast is evaluated to requirementsin this Standard.1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shockor injury to persons shall be evaluated using appropriate additional component and end-productrequirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL 1574-2004道路照明系統

1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.

UL 1776-2002高壓清洗機

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.