廣場用陶瓷磚檢測

廣場用陶瓷磚檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 9195-2011建筑衛生陶瓷分類及術語

本標準規定了建筑衛生陶瓷的分類、術語和定義。本標準適用于建筑衛生陶瓷的設計、生產、質量檢驗、貿易、科學研究、教學等領域。

GB/T 23458-2009廣場用陶瓷磚

本標準規定了廣場用陶瓷磚的術語和定義、技術要求、試驗方法、檢驗規則、標志、使用說明書、包裝、運輸及貯存。本標準適用于廣場、步行街、社區園林等室外場所地面裝飾鋪貼的陶瓷制品。

GB/T 35610-2017綠色產品評價 陶瓷磚(板)

本標準規定了綠色產品陶瓷磚(板)的術語和定義、產品分類、評價要求和評價方法。本標準適用于陶瓷磚、陶瓷板(含干掛空心陶瓷板)和廣場磚等建筑陶瓷產品。

GB/T 51100-2015綠色商店建筑評價標準

本標準適用于綠色商店建筑的評價。

GB/T 51148-2016綠色博覽建筑評價標準

本標準適用于綠色博覽建筑的評價。

GB/T 51165-2016綠色飯店建筑評價標準

本標準適用于綠色飯店建筑的評價。

GB/T 51188-2016建筑與工業給水排水系統安全評價標準

本標準適用于新建、擴建、改建和既有建筑與工業的給水排水系統安全評價。本規范不適用于軍工等特殊行業建筑與工業的給水排水系統安全評價。

CECS 244-2008砂基透水磚工程施工及驗收規程

本規程適用于城市廣場、人行道、園林、校園、停車場、車行道、住宅小區和室外運動場等新建和改擴建砂基透水磚工程的施工及驗收。

JGJ/T 331-2014建筑地面工程防滑技術規程

本規程適用于新建、擴建、改建的建筑工程中建筑室內外防滑地面的設計、施工及驗收。

RB/T 110-2014能源管理體系.建筑衛生陶瓷企業認證要求

本標準規定了建筑衛生陶瓷企業能源管理體系的認證要求。本標準適用于建筑衛生陶瓷企業的能源管理體系認證，可用于企業建立、實施、保持和改進其能源管理體系，也可作為各相關方評價企業能源管理體系的依據。其他陶瓷企業可參照使用本標準。

DB11/T 152-2003城市道路混凝土路面磚

本標準規定了城市道路混凝土路面磚的分類、一般規定、技術要求、試驗方法、檢驗規則、標識、使用說明書、包裝、運輸、貯存等。本標準適用于以水泥和集料為主要原材料，經加壓、振動加壓或其他成型工藝制成的，用于鋪設城市道路人行道、城市廣場等的混凝土路面及地面工程的塊、板等。其表面可以是有面層（料）的或無面層（料）的；本色的或彩色的。用于鋪設城市道路人行道、城市廣場的其它產品材料（如地材），可參照?qǐng)?zhí)行。

DB64/ 558-2009建筑工人安全操作規程

本標準規定了建筑工人安全操作的術語和定義、總則、一般規定、架子工、瓦工、抹灰工、石工、木工、鋼筋工、混凝土工、普通工、電工、安裝電工、防水工、起重吊裝工、金屬焊割作業工、油漆工、測量工、機械設備維修工、水暖工、鉚工、通風工、筑爐工、保溫工、樁基施工、大模片施工、鋼結構及網架施工、裝飾裝修施工、拆除施工、土方及筑路機械、樁工機械、吊裝及垂直運輸機械、混凝土機械、中小型施工機具、市政工程的操作。

ASTM C1193-2005a接縫密封劑使用的標準指南

This guide provides information and guidelines for consideration by the designer or applicator of a joint seal. It explains the properties and functions of various materials, such as sealant, sealant backing, and primer, among others; and, procedures such as, substrate cleaning and priming, and installation of the components of a sealed joint. It presents guidelines for the use and application of the various materials, design of a sealant joint for a specific application, and environmental conditions and effects that are known to detrimentally affect a sealant joint. The information and guidelines are also useful for those that supply accessories to the sealant industry and for those that install sealants and accessory materials associated with sealant use. In addition to the design and installation data in this guide, consult the sealant manufacturer about applications for its products and their proper use and installation. Considering the range of properties of commercially available sealants, the variety of joint designs possible, and the many conditions of use, the information contained herein is general in nature. To assist the user of the guide in locating specific information, a detailed listing of guide numbered sections and their descriptors are included in Appendix X2.1.1 This guide describes the use of a cold liquid-applied sealant for joint sealing applications. Including joints on buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and bridges. Information in this guide is primarily applicable to a single and multi-component, cold liquid-applied joint sealant and secondarily to a precured sealant when used with a properly prepared joint opening and substrate surfaces.1.2 An elastomeric or non-elastomeric sealant described by this guide should meet the requirements of Specification C 834, C 920, or C 1311.1.3 This guide does not provide information or guidelines for the use of a sealant in a structural sealant glazing application. Guide C 1401 should be consulted for this information. Additionally, it also does not provide information or guidelines for the use of a sealant in an insulating glass unit edge seal used in a structural sealant glazing application. Guide C 1249 should be consulted for this information.1.4 Practice C 919 should be consulted for information and guidelines for the use of a sealant in an application where an acoustic joint seal is required.1.5 This guide also does not provide information relative to the numerous types of sealant that are available nor specific generic sealant properties, such as hardness, tack-free time, or curing process, among others. Guide C 1299 should be consulted for information on generally accepted comparative values for the characteristics and properties of the more common generic types of liquid-applied sealant.1.6 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.1.7 The Committee with jurisdiction for this standard is not aware of any comparable standards published by other organizations.1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.1.9 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.

ASTM C1528-2002外用尺寸石選則的標準指南

1.1 This guide is intended to be used by architects, engineers, specifiers, contractors, and material suppliers who design, select, specify, install, purchase, fabricate, or supply natural stone products for construction applications.1.2 Consensus Standard8212;This guide is an industry consensus standard drafted in a cooperative effort among engineers, architects, geologists, producers, and installers of natural stone.

NF P10-204-1-1-2008建筑工程.小型磚石隔墻.第1-1部分:技術模型條款的合同單

Le présent document définit les clauses techniques d'exécution d'ouvrages courants de cloisons de petits éléments de ma?onnerie hourdés au mortier d'usage courant, au mortier-colle pour joints minces ou au platre.Les dites cloisons ont une épaisseur inférieure ou égale à 15 cm.Les ouvrages concernés sont les cloisons de distribution, les cloisons séparatives non porteuses, les parois de gaines techniques et les cloisons de doublage de batiments destinés aux logements, batiments scolaires et hospitaliers et aux immeubles de bureaux, pour des conditions normales d'utilisation, c'est-à-dire occupés en permanence et sans surpeuplement.Pour certains ouvrages autres que courants dont les exigences peuvent être différentes (batiments à usage industriel, agricole, garages), les prescriptions peuvent être adaptées en tenant compte des caractéristiques particulières des constructions et de leur destination, fonction du programme arrêté par le ma?tre d'ouvrage, précisé dans les Documents Particuliers du Marché.Le présent document ne s'applique donc pas aux murs de remplissage extérieurs ni aux murs participant à la stabilité de la structure qui sont traités par la norme NF DTU 20.1.

ANSI/ASSE A10.7-2011商用炸藥和起爆劑的運輸,存儲,裝卸和使用的安全要求

This standard is applicable to the transportation, storage, handling, and use of commercial explosives and blasting agents in the construction industry.

ANSI/ASSE A10.8-2011腳手架安全要求

This standard establishes safety requirements for the construction, operation, maintenance, and use of scaffolds used in the construction, alteration, demolition, and maintenance of buildings and structures. This standard does not cover permanently installed suspended scaffold systems or aerial platforms. Please note that this standard is based on the 2001 version of the A10.8 Standard, which was administratively withdrawn by ANSI. Since the standard was withdrawn it is viewed/processed as a new standard, but the new document is based on the 2001 administratively withdrawn standard.